Axial 1/10 SCX10 II Deadbolt 4WD Brushed RTR, Blue

$consist of('Page-Include', 'cid', 'hh-pdp-message-AXI03025-bundle-promo')$



.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Sensible, durable steel C-channel chassis with cross braces for reinforcement and rigidness

Single-piece AR44 front and rear axles with molded truss for extreme toughness

High pinion style that adds ground clearance, enhances driveshaft angles, and increases equipment surface contact

LCX AX10 transmission with adjustable gearing ratio for very high speed or competition-level crawling speed

Universal joint axles allowing approximately 45° of steering and supplying an effective, high-performance drivetrain

Enhanced equipment ratio of 3.75 that minimizes torque twist

Hypoid-cut metal equipments

Larger load ranked bearings for toughness

8° Kingpin axle that gets rid of tire scrub

10° Increment modifications for knuckle providers and straight axle adapters

Chassis installed servo with adjustable servo installing system

Oil-filled, coilover shocks with threaded shock bodies

Licensed CRC front bumper

3-piece WB8 HD Wildboar front and rear driveshafts with strengthened slider-floater tube to minimize flex and tiredness

Easy-access, waterproof receiver box





Agile, cost effective, and upgradeable
The ready-to-run Axial® SCX10™ II Deadbolt™ 4WD is a budget-friendly, highly capable, and quickly upgradeable RC rock crawler that's perfectly suited for both knowledgeable adventurers and hobby newbies. It combines rugged scale looks with the exceptional handling of the trail-ready SCX10 II chassis, in a 12" brief wheelbase setup that's nimble enough to handle twisty trails.

The SCX10 II remains one of the very best 1/10 scale rock crawler chassis ever developed. This high-strength, C-channel chassis is made from durable steel with cross braces for reinforcement and rigidness. The contoured skid plate considerably minimizes problems, and the simplified style makes upkeep fast and easy.

Highly adaptable, the SCX10 II Deadbolt 4WD likewise features an adjustable wheelbase, adjustable body install, adjustable bumper installs with swaybar installing points, and installing points for an optional 2-speed transmission and servo winch. The consisted of LCX AX10™ transmission, with a three equipment layout, sturdy slipper, sealed equipment cover, and all-metal equipments, accepts a wide variety of gearing options. Its total ratio can be adjusted utilizing different pinion and stimulate equipment options for very high speed or competition-level crawling speed.

Just as a full-size truck has its steering box located on the frame, Axial® puts the Deadbolt's adjustable servo install on the SCX10 II chassis frame and permits a wide variety of servos to be utilized. Universal joint axles permit approximately 45° of steering and supply an effective, high-performance drivetrain. The single-piece AR44™ front and rear axles feature a molded truss for extreme toughness. The pinion equipment is 6mm above center for higher ground clearance and enhanced driveshaft angles. Metal pet dog bones and helical cut internal equipments are basic equipment, and the drivetrain includes complete, top quality ball bearings.

The oil-filled shocks, with threaded bodies and a single coilover spring, can be tuned to fulfill the dampening needs of any trail. Sensible shock hoops with numerous installing positions let you adjust the suspension for maximum efficiency. S30 substance, 4.7" x 1.9" broad Nitto Path Grappler M/T tires on technique 307 Hole wheels supply ample ground clearance for off-road tracks and have a large block tread pattern for outstanding bite in all terrain.

With a practical motorist figure and outside cage complete with light bar (LED lights sold independently), the Axial® SCX10 II Deadbolt 4WD provides scale enjoyment and class-leading efficiency in a hassle-free, ready-to-run package. Nearly all electronics, consisting of a Spektrum™ SLT2 2.4GHz radio system, motor, and ESC, are supplied and set up. Just include your choice of batteries and battery charger and begin your adventure!





 






STEEL C-CHANNEL FRAME RAIL CHASSIS
The practical, high-strength SCX10™ II C-channel chassis is made from durable steel with cross braces for reinforcement and rigidness. The contoured skid plate considerably minimizes problems, and the simplified style makes upkeep fast and simple. There's likewise an adjustable body install, adjustable bumper installs with swaybar installing points, and installing points for an optional 2-speed transmission and servo winch.
 







ADJUSTABLE WHEELBASE
The Deadbolt SCX10 II chassis is developed at a 12.0" wheelbase length but is quickly adapted to either a 11.4" or 12.3" wheelbase (optional link sets sold independently). Axial developed the chassis so that all the wheelbase adjustability takes place out back without sacrificing front-end suspension geometry. Simple removal and setup of the suspension links and altering the drive shaft length permits a simpler way to adjust the wheelbase.
 



LCX AX10™ TRANSMISSION
The tested LCX AX10 transmission features a three equipment layout, sturdy slipper, sealed equipment cover, and all-metal equipments. It accepts a wide variety of gearing options. The total ratio can be adjusted utilizing different pinion and stimulate equipment options, allowing very high speed or competition-level crawling speed.
 







4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-link style for the rear which is enhanced to minimize axle steer and torque twist. It likewise helps with high off-camber climbs up by having the proper amount of anti-squat and roll characteristics.
 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts have a bigger diameter cross pin (2x11mm) together with an M4 screw shaft (2mm hex drive) for included strength. A center splined slider floats between each end and features included product to minimize flex and tiredness.
 






AR44™ HIGH PINION AXLE
Single-piece AR44 front and rear axles feature a molded truss for extreme toughness. The pinion equipment is 6mm above center, increasing ground clearance and enhancing driveshaft angles. Metal pet dog bones and helical cut internal equipments are basic equipment, and the drivetrain includes complete, top quality ball bearings.
 



CHASSIS MOUNTED SERVO
Just as a full-size truck has its steering box located on the frame, Axial puts the servo installing place on the chassis. The adjustable servo installing system permits a wide variety of servos to be utilized.
 







ADJUSTABLE COILOVER SHOCKS
The oil-filled shocks have actually threaded bodies and a single coilover spring. The dampening rate can be tuned to fulfill the needs of the trail. Sensible shock hoops with numerous installing positions let you adjust your suspension for maximum efficiency.
 



METHOD 307 HOLE 1.9" WHEELS
Officially licensed METHOD 307 Hole 1.9" Wheels offer durability and clean looks. The Hole features a simulated beadlock ring using a strategically placed under-cut on the wheel's outer lip.
 







NITTO TRAIL GRAPPLER M/T 1.9" TIRES
The S30 substance, 4.7" (119.4mm) x 1.9" (48.2mm) broad Nitto Path Grappler M/T tires consisted of with the SCX10 II Deadbolt supply ample ground clearance for off-road tracks. The large block tread deals outstanding bite in all surface.
 



WATER-RESISTANT RECEIVER BOX
Found on the side plates, the receiver box permits simple access and decreases the center of mass. Three silicone seals are consisted of: one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover.
 







SPEKTRUM™ 40A BRUSHED ESC WITH IC3® CONNECTOR
The Spektrum™ 40A Brushed ESC (SPMXSE1040) is 2-3S LiPo capable, yet quickly changed "in the field" between LiPo and NiMH battery types.
40 Amp Rated

2-3S LiPo Compatible

5-9 Cell NiMH/NiCd Compatible

Forward/Reverse

Adjustable Drag Brakes

 



SPEKTRUM™ SLT2 TRANSMITTER
The SLT2 2-channel radio system provides lots of functions of higher-end 2.4GHz radio systems like throttle/steering travel adjust and throttle limiting.

Built-in 3-position throttle limiter

Steering and throttle rate and trim modifications with guiding reversing

FHSS 2.4GHz protocol provides extended range and interference-free efficiency

AA batteries consisted of

 







SPEKTRUM™ S614 SERVO
The Spektrum S614 servo provides 201 oz-in of guiding torque and metal equipments for strength. It's waterproof for extra protection against the components.
 



SPEKTRUM™ SLR300 SLT™ RECEIVER
The consisted of SLR300 3-channel receiver features interference-resistant SLT FHSS 2.4GHz technology and channels for throttle, steering, and auxiliary functions. Its bind port can likewise be utilized to power gadgets like fans, lights, or a lap sensor.
 






 



Specifications

Approximate Assembly Time: Less than 1 Hour

Battery: Sold Separately

Brakes: Essential with ESC

Charger: Sold Separately

Color Alternative: Blue

Conclusion Level: Ready-To-Run

Adapter Type: IC3

Differential: Locked

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Last Drive Ratio: 40.44:1

Front Track: 7.5 in (190.5mm)

Gear Pitch: 32P

Ground Clearance: 2.7 in (68mm)

Motor Size: 540

Motor Type: Brushed

Pinion: 14T

Power Type: Electric

Item Height: 9" (229 mm)

Item Length: 18.1" (460 mm)

Item Weight: 4.65 pound (2.1 kg)

Item Width: 8.8" (224 mm)

Radio: Included

Rear Track: 7.5 in (190.5mm)

Receiver: Consisted of

Scale: 1/10

Servos: Consisted of

Shock Type: Oil Filled

Speed Control: Included

Spur Gear: 56T

Guiding Type: 2WS

Car Type: Rock Spider

Waterproof: Yes