Associated RC8B3.1 Team Kit

**Extra Technical Information Will Be Added When It Appears.**
This is the Radio Controlled, Glow Powered, 1/8 Scale
RC8B3.1 Team Buggy Kit from Team Associated.

New includes that vary from the RC8B consist of;
**New 4-Shoe Clutch**
**H.T.C. (High Torque Capability) differentials**
**Modified Suspension Arm Rotates for more ground clearance**
**Anti-roll linkage curves altered for more chassis support**
**New shock springs**
**Pro-Line Predator Body**

FEATURES:
Chassis: 7075-T6 aluminum, 0.12" (3mm) thick
Own: Four wheel with front and rear 3.7" (94mm) CVA drive shafts
Differentials: H.T.C (High Torque Capability) with increased fluid
    capability, and a more consistent feel
Gearboxes: 3.38:1 internal ratio with easy access to differentials
Shocks: 16mm Big Bore hard anodized aluminum, 0.14" (3.5mm) diameter
    TiN covered alloy shock shafts, silicone shock oil, bleeder style
    caps, brand-new 0.79" (20mm) inner diameter springs
Shock Towers: 7075-T6 aluminum
Suspension: Pillow ball front uprights for increased adjustability
    and enhanced toughness, refined geometry with hinge pin inserts
    for easy roll center modifications
Body: Pro-Line Predator clear body with black plastic wing
Radio Tray: Carbon fiber with sealed receiver box
Clutch: 4-shoe
Brake: Bonded pads and machined steel rotors
Fuel Tank: Formed plastic construction with splash guard
Ball Bearings: Factory Team rubber sealed
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the car in relation to the
    chassis, caster blocks adjust 14, 16, or 18 degrees with molded
    inserts
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind vehicle

CONSISTS OF:
RC8B3.1 Team Buggy Kit with Clear Body, Fuel Tank, Shocks, Decals and
    Shock Oil, Diff Oil, Air Filter and User's manual

REQUIRES:
Radio: 2-channel with high torque guiding servo
Engine: .21 cu in rear exhaust
Exhaust System:
Receiver Load: 4.8 - 7.4V flat, LiPo, LiFe or NiMH
Wheels: 1/8 scale buggy
Tires: 1/8 scale buggy
Fuel: Design car mix, 30% nitro recommended
Glow starter, fuel bottle, starter box, tools and track devices

SPECIFICATIONS:
Vehicle;
Length: 19.2" (488mm)
Width and weight differ with engine, exhaust, wheels and tires utilized in
    the completed set
Wheelbase: 12.89" (327.5mm)
Internal Equipment Ratio: 3.38:1
    Body;
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Stock Number
2 8x16x5mm Fr Diff 1 DTXC1585
2 8x16x5mm Ctr. Diff 1 DTXC1585
2 8x16x5mm Rear Diff 1 DTXC1585
4 6x10x3mm Steering 2 DTXC1561
4 5x8x2.5mm Steering 2 DTXC1523
2 6x12x4mm Fr Gearbox 1 DTXC1569
2 6x12x4mm Fr Gearbox 1 DTXC1569
4 8x16x5mm Flanged Fr Uprights 1 ASCC1565
4 8x16x5mm Flanged R Uprights 1 ASCC1565
2 5x10x4mm Clutch 1 DTXC1535