Associated Flat Head Hex Screw M3x8mm (10)

This is a package of 3x8mm Associated Flat Head Hex Device Screws.
    These screws can be utilized anywhere this size is needed.

FEATURES:
Black steel building
Hexagon socket drive insert

INCLUDES:
Twenty 3x8mm flat head device screws

REQUIRES:
2.5mm allen secret, GPMR8012

This thing compliments the above gone over thing.



This is the replacement Front or Rear Transmission Case (gearbox)
for the Associated Monster GT RTR
This part mounts on the front or back of the chassis and houses the
differential gear and differential pinion.

FEATURES:
2 piece, black plastic building

INCLUDES:
2 gearbox halves
One plastic gearbox collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
Three 3x25mm phillips head screw
Four 3mm nylon insert lock nuts

REQUIRES:
Assembly following the guidelines that had the design

REMARKS:
This bundle contains parts for one transmission case. If both the
    front and rear case is needed, order two of this number.

The listed below thing additionally pairs actually well with the thing being gone over.



This is a set of Bellcrank Hardware for the Group Associated
Monster GT RTR

FEATURES:
Metal building

INCLUDES:
Four metal ball eyelets
Four 3x16mm phillips head screws
2 3mm hex head shoulder screws
Four 3mm metal lock nuts with nylon inserts

REQUIRES:
Assembly onto the design following the manual that had the kit

REMARKS:
To obtain the rest of the parts needed for a complete bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

This is a wonderful enhancement to the thing currently being gone over.



This is the Rear Shock Rod End for the Group Associated GT vehicles.

FEATURES:
Black nylon building ball ends
Steel swivel balls

INCLUDES:
2 ball ends
2 steel swivel balls

REQUIRES:
Installation

Get this thing to enhance the one you are reading about.



This is the Replacement Shock Rebuild Kit w/ Shock Shafts
for the Group Associated Monster GT. This Rebuilds 2 Shocks.

FEATURES:
Shock Shafts-
    Steel Building and construction
    Sleek Silver in Color
    Requirement Threading on Bottom
    Dual E-Clip Cut-Outs on Top
Diaphragms-
    Rubber Building and construction
    Black in Color
O-Rings-
    Silicone Building and construction
    Blue in Color
Shock Body Bushing-
    Nylon Building and construction
    White in Color
E-Clips-
    Black in Color

INCLUDES:
2 Steel Silver Shock Shafts
2 Black Rubber Shock Diaphragms
Four Blue Silicone O-Rings
2 White Nylon Shock Base Bushings
2 3/32" Black Metal E-Clips

REQUIRES:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Diameter: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Diameter: 0.56" (14.22mm)
Thickness: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Diameter: 0.14" (03.55mm)
Outer Diameter: 0.26" (06.60mm)
Thickness: 0.05" (01.27mm)

E-CLIPS-
External Diameter: 0.23" (05.84mm)
Inner Diameter: 0.09" (02.28mm)
Thickness: 0.01" (00.25mm)