Associated Enduro 1/10 Trail Truck 4Wd Builder's Kit 2

The upgraded Builder's Set 2 includes the Associated GKS shock towers in front and back. The shock mount inserts offer the capability to change shock angle, droop, and lorry flight height without affecting spring preload. Matched up with the shock mount inserts are our race-proven, ultra-smooth Factory Team bronze shocks with black caps and collars--perfect for traversing rough surface. Along with the upgraded shock towers, we have actually included the GKS aluminum track bar mount that is bolted straight to the frame rails. This makes the front suspension more rigid and flex-free with a more precise steering feel. Also included are upgraded Factory Team 12.3" wheelbase high-clearance relate to black surface and low-friction Delrin pivot balls, which are more resistant to abrasion and friction wear.

You get all these new functions along with the advanced Stealth X transmission with the capability to change the front and rear drive ratios individually across three different levels. In package you get both the 5.7% and 11.83% overdrive gears, and offered separately is a one-to-one ratio alternative for those who want to drive the front and rear equally.

The behind-the-axle (BTA) steering considerably improves method angle and front-end clearance, making rough surface much easier to handle.

With all these upgraded functions crammed in one box, we know the new and improved Enduro Builder's Set 2 is much better than ever. It's the perfect rig for whatever experiences lie around the next corner. Your journey begins here!

Items required to Total:

-1:10 scale 540-size electrical motor with 48-pitch pinion gear (#27465 Reedy Radon 2 Spider 550 Brushed Motor)

-1:10 scale electronic spider speed control

-LiPo battery (based on your speed control) (#758 WolfPack LiPo 3000mAh 30C 7.4V Shorty)

-Battery battery charger (for the battery type chosen above) (#27203 Reedy 1416-C2L Dual AC/DC Battery Charger)

-2-channel surface transmitter

-2-channel receiver

-Steering servo (#27150 RC4020A HV Digital Comp. Spider Servo)

-Body and paint

-Wheels with 12mm hex installing (#42101 Enduro Method 701, black. #42109 Enduro The Ocho Wheels, black.)

-Tires (#42106 General Grabber X3)

-Other useful products required: FEET Body Scissors (#1737), thread-locking substance (#1596), FEET Body Reamer (#1499), FEET Hex/Nut Driver set (#1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or Accuracy Ruler

Features: