Associated 1/24 Enduro24 Ecto RTR Trail Truck 4WD

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
This small scale, 4-wheel drive spider comes equipped with many features found on bigger size rigs. Full-time 4-wheel-drive transmission with separated transfer case, metal vertical chassis rails, and 4-link suspension make sure climbing up over challenges will be a breeze. Providing power and control is a 2-in-1 receiver/ESC, 2-channel radio, effective servo, and single-cell LiPo. You get all this and more packed into a practical package.





Features

Single-piece polycarbonate Ecto body

2.4GHz 2-channel radio

2-in-1 receiver and ESC combination

Single-cell LiPo battery consisted of

USB charger consisted of

7mm wheel hexes

Vertical metal chassis rails

Soft substance rubber tires

Soft, coil-over shock absorbers

Telescoping center driveshafts

Adjustable body posts

Removeable front bumper

Steel pivot balls





Overview
Do not let the size deceive you---the Enduro24 Trail Truck with Ecto body can supply hours of difficult driving and scale enjoyable! No matter what your skill level, there's a lot of enjoyable for everyone.
Just install the batteries, charge, and go! Right out of package, the Enduro24 Ecto RTR is ready for adventure... Are you?







4-Link Front and Rear Suspension
Front and rear injection-molded 4-link suspension enables smooth articulation to crawl over rough terrain.
 



Chassis-mounted Servo
The chassis-mounted servo offers maximum guiding while keeping scale looks.
 



Wheels and Tires
Crawl, grip and climb over challenges with black, injection-molded single-piece rims covered in soft substance rubber tires.
 



Forward-mounted Motor and Divorced Transfer Case
The forward-mounted motor puts the heaviest part of the rig over the front tires. This forward-bias weight keeps the front tires on the ground and offers better front grip during climbs. The separated transfer case offers a lower center of mass in a compact space. Not just does this combination perform well, it likewise adds scale realism, allowing for a lot of room should you wish to include a custom-made body or interior.
 



Requirements

Battery: Consisted of

Body: Polycarbonate

Battery charger: Consisted of

Completion Level: Ready-To-Run

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Gear Ratio: Varies

Motor Type: Brushed

Power Type: Electric

Item Length: 8.46" (215 mm)

Item Width: 4.02" (102 mm)

Radio: Included

Receiver: Consisted of

Scale: 1/24

Servos: Consisted of

Shock Type: Coil Over Shocks

Speed Control: Included

Suspension: Solid Axle

Vehicle Type: Rock Spider

Wheel Hex Size: 7mm

Wheelbase: 5.04" (128 mm)