Associated 1/10 4Wd Enduro Trail Truck, Ecto Black Rtr

Aspect RC Ecto Trail Truck w/Scratch 'N Weather Bodyshell

The Aspect RC Enduro Ecto Trail Truck 4x4 Ready to Run 1/10 Rock Crawler. This Scratch 'N Weather bodyshell comes out of package with a resilient black exterior paint job. This enables the paint to be scratched and weathered as you drive and scrape against rocks and branches. This means your polycarbonate bodyshell looks more scale the more you drive it. Aimed towards the major RC rock crawler enthusiast, the Enduro Ecto Trail Truck is packed full of performance functions that make sure to impress.

Built on Aspect RC's tested stamped steel C-channel chassis this truck includes the Gatekeeper Suspension bundle (GKS) with rear tracking arms that move the shocks forward. This permits a bigger shock tuning window and improves weight predisposition. The tracking arms are paired with a rear anti-roll bar for a more steady and consistent suspension when crawling on the rocks. An adjustable aluminum track bar install securely bolted to the chassis rail provides the Enduro Ecto more trustworthy and responsive steering without the flex. Shock install inserts provide numerous mounting positions to permit precise suspension tuning, whether moving the shocks up, down, forward, or back.

Behind-the-axle (BTA) steering link substantially improves approach angle and front-end clearance, making rough terrain simpler to handle. The Stealth X includes the ability to change the rear drive ratio independently of the front drive throughout 3 levels: stock overdrives the front end 5.7% (set up in the Ready to Run), choice 1 offers a one-to-one drive ratio front-to-rear (available independently), and choice 2 overdrives the front end 11.83% (included with All set to Run).

NOTE: The body included with this truck comes devoid of scratches and weathering. The photos revealed are an illustration of the weathering effect.Features:Stealth X Transmission
Aluminum Track Bar Mount
Shock Mount Inserts
Rear Anti-Roll Bar
Reedy Power 5-slot 14-turn brushed 550 crawler motor
Water Resistant Reedy Power ESC
Routing Arm Rear Suspension
Behind-the-axle (BTA) steering
Aluminum steering plates
Integrated servo winch install
Threaded aluminum shock bodies
CMS (Chassis Installed Servo)
Universal front drive axles
Marked steel frame rails
Aluminum motor plate
Enhanced ball cups for more fluid axle articulation
Telescopic driveshafts front and rear
Extruded aluminum driveshaft splines
One-piece rear axle style
Splined front axle with adjustable caster
Machined input pinion gear
Metal ring gear
Machined steel leading shaft
Sturdy 5mm diameter steel links
Metal ball bearings included
12mm Hex
Adjustable front track bar
Accredited 1.9"x4.65" General Grabber X3 tires

Specifications:Scale: 1/10
Power Source: Electric
Length: 462mm (18.19in)
Width: 236 (9.29in)
Wheelbase: 325mm (12.8in)

Required to Complete:(1) Battery Load with T-Style Adapter
(1) Charger (Suitable with battery)
(4) AA Batteries for Transmitter