ARRMA HD 57T Spur Gear 0.8Mod

This HD 57T Spur Equipment is made from top quality, long lasting composite material for consistent performance.

Features

Accuracy made equipment tooth setup - Hard composite material for lasting toughness and smooth equipment mesh – 57 teeth, 0.8 module

Consists of

1 x HD 57T Spur Equipment

Frequently gotten with the item that you are currently checking out.

15T 0.8Mod Safe-D5 Pinion Gear

Want an additional great item to enhance the above mentioned item?

Aluminum Motor Mount Set

This top quality Aluminum Motor Mount Set is an ideal replacement part for your ARRMA vehicleFeaturesRed anodized aluminum 6mm thick motor plate for strong, accurate motor positioning and exceptional heat dissipation -  Equipment cover has actually included defense for spur equipment, pinion and slipper clutch from dirt ingress - Hard composite material for lasting toughness - Accuracy made for consistent fit to your chassis

SPECIFICATION

Designed to enable the fit of 36 series size motors (1" or 25.4mm motor screw spacing)

Pinion sizes 10T to 26T can be fitted when utilized with the 57T 0.8 module spur gearIncludes1 x Aluminum Motor Plate

1 x Power Module Housing

1 x Equipment Cover

1 x M3 x 8mm Flat Head Screw

Want an additional great item to enhance the above mentioned item?

Ball Bearing 10x15x4mm 2RS (2)

Below is a great item that lots of others have actually bought at the very same time.

Slipper Clutch Maintenance Set

Below is a great item that lots of others have actually bought at the very same time.

Pinion Gear 15T 0.8mod 4x4

This is the 15 Tooth 0.8Mod Pinion Equipment for the Arrma BLX 4x4 Vehicles.
**Does not fit the Mega versions.**

FEATURES:
Steel building
Number of teeth marked on back of equipment for easy identification

INCLUDES:
15 Tooth 0.8Mod Pinion Equipment with Set Screw

REQUIRES:
2mm Hex Wrench (GPMR8011) for Set Screw

SPECS:
Variety Of Teeth: 15
Equipment Pitch: 0.8Mod
Diameter of Tooth Location: 0.53" (13.5mm)
Hole Diameter: 0.196" (5mm)

This item is often gotten with the above mentioned item.

C-Hubs 4x4 (2)

This is a pair of C-Hubs for the Arrma
Granite Mega 4x4 Monster Truck, and the Senton Mega 4x4 Brief Course Truck.

FEATURES:
Composite plastic building
Holds the steering blocks in location

INCLUDES:
One each Left and Right C-Hub

The below item additionally pairs really well with the item being discussed.

Bearing 10x15x4mm (2)

These are the 10x15x4mm Ball Bearings from Arrma.

FEATURES:
Steel building
Utilized in the differential of the Arrma Raider, Fury, ADX-10, Vortex
    Granite, and Mojave

INCLUDES:
Two 10x15x4mm Ball Bearings

This item is often gotten with the above mentioned item.

Body Clip Retainer 1/8 Scale Black (4)

These high quality body clip retainers tether your body clips to your bodyshell. This means that you do not lose your clips when they become removed from the body post throughout a roll-over  when running your automobile, meaning no more lost clips when you have eliminated your bodyshell.

 FeaturesProduced from strong, versatile rubber to offer toughness

Specifically designed bodyshell grommet attaches retainer to hole in bodyshell

Big pull tab permits fast and easy body clip removal even with wet or cold hands

ARRMA branded

Provided with plus size body clipsIncludes4 x ARRMA Body Clip Retainers

4 x Plus size Body Clips

1 x Fitting Directions

Requirements

Device Type: Body Clips

Part Type: Chassis Components