APC 9x7.5 Thin Electric Prop

This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane just (not for radiance|radiance} engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 9" (229mm)
Pitch: 7.5
Center inner size: 0.25" (605mm)

You will certainly like this item if you have the item previously stated.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are manufactured using a pultrusion procedure. This method
    triggers the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Supplying substantially greater strength and stiffness than
    glass filled nylon.
The additional stiffness is useful to control of vibration
    resonance response.
The greater strength permits the use of thinner cross-sections,
    useful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Size: 9"
Prop Pitch: 6
Center Density: 0.40"
Center Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.

This product praises the main item here.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

Many others have actually bought this product along with the product that you are currently reviewing.



These are the ElectriFly Prop Saver O-rings from Terrific Planes.

FEATURES:
Wraps around the prop to hold it on and protect it during crashes

CONSISTS OF:
5 prop saver O-rings

REQUIRES:
Setup

Many others have actually bought this product along with the product that you are currently reviewing.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For use on electrical powered airplane just (not for glow engines).

FUNCTIONS:
Gray composite building
Comes with two adjuster rings that adapt to various motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 7"
Pitch: 6
Center inner size: 0.25" (6.3mm)

Here is a excellent product that several others have actually bought at the same time.

8x8 Thin Electric Propeller

This is a 8x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane just (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 8" (203mm)
Pitch: 8
Center inner size: 0.25" (6.3mm)