APC 9x6 Slow Flyer Propeller

This is a 9x6 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a lot of torque even at slow speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers help maintain true, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of small shaft locating rings
One locating ring instruction sheet

NEEDS:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 9"
Pitch: 6

REMARKS:
Slo-Flyer props are Not created for Radiance engines

This product is frequently purchased with the above pointed out product.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing material:
1 x 9g TITAN Servo Sets (with devices)

This product praises the main item below.

930Kv Brushless Outrunner Motor, 3.17 Mm Shaft, 3.5Mm Bullet Con

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 930Kv
Max. effectiveness current: 4-10 Amp
NoLoad current / 10 V: 0.4 Amp
Existing capability: 12 A/60 s
Max. Performance: 80%
Shaft diameter: 3mm
Weight with cable televisions: 47g
Measurements(mm): 27.5x30

Recomended design weight: 300 - 800 g
Recomended prop without gearbox: 10 cells (THREE Lipo) 10x5

This is a great addition to the product currently being reviewed.

20A Electronic Speed Controller For Brushless Motors

Functions:
100% Brand New
20A 20 A Brushless Motor Speed Controller RC BEC ESC For helicopter
Consistent current 20A Max 25A <10s
Li-Poly 2-3 cells; Ni-MH 4-10 cells Auto Detect
Break On/Off;
BEC: 2A
MAX RPM 20,000 with 2212 Motors
Auto Low battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell Lipo
*Note: Timing and P WM can be programmable if required.
Currently we just want to keep this product simple and easy to use for Beginers.
According to our experience Too complex of the small ESCs only make more trouble
and need more effort of supporting

Specifications:
Items :20A
Weight :21g
Dimensions: 45.0*26.0*8.0mm
Current(A):20-25
BEC :2A
PWM:8K
Li-Po :2-3
Ni-Mh/Ni-cd :4-10Ni-Mh

Packing Content:
1 X 20A ESC

Get this product to boost the one you read around.

E/Z Connector For Rod Or Cable, 12/Pkg

Bulk replacement EZ Connectors by DuBro.

PACKAGE
INCLUDES:
12-EZ Connectors (brass)
12-Retainers (snap onto the bottom of the EZ Connector)
12-Washers (gray metal)
12-Socket Head Screws (help hold the pushrod wire in place)

FEATURES:
Brass connector is round with pre-drilled center hole
Black nylon retainers

SPECS:
Screws: 1/8"
Washers: 7/32"
7/26/94sk