APC 9x4.7 Slow Flyer Propeller

This is a 9x4.7 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Composite construction
Enhancing carbon fibers assist preserve real, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring instruction sheet

NEEDS:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 9"
Pitch: 4.7

COMMENTS:
Slo-Flyer props are Not created for Glow engines

Get this item to improve the one you read about.

9x4.7 Slow Flyer Pusher

This is the APC 9x4.7 Slo-Flyer Pusher Electric Propeller.

FEATURES:
Opponent electrical and Park-Flyer type aircraft
Pusher propellers formed in the opposite direction from standard
    propellers, they are created for planes with the motor dealing with
    backwards in the rear of the airplane, PUSHING the aircraft forward
Light-weight molded nylon construction minimizes rotating mass for
    higher output and longer life
Enhancing fibers assist preserve real, continuous pitch at any RPM

INCLUDES:
APC 9x4.7 Slo-Flyer Pusher Electric Propeller
0.236" (5.9mm) and 0.188" (4.8mm) locating rings
Direction sheet

NEEDS:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 9"
Pitch: 4.7"

COMMENTS:
Slo-Flyer props cannot be utilized on radiance or gasoline powered engines

This item is regularly gotten with the above stated item.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing material:
1 x 9g TITAN Servo Sets (with devices)

Many others have actually gotten this item in addition to the item that you are presently reviewing.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon construction minimizes rotating mass for
    higher output and longer life.
Reinforcing carbon fibers assist preserve real, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring instruction sheet

NEEDS:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 8"
Pitch: 3.8

COMMENTS:
Slo-Flyer props are Not created for Glow engines