APC 7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Accuracy Composites.
For utilize on electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite construction
Comes with two adapter rings that adapt to various motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

NEEDS:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 7"
Pitch: 6
Center inner size: 0.25" (6.3mm)

This is a wonderful enhancement to the item presently being discussed.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One guideline sheet

NEEDS:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 7"
Pitch: 5
Center inner size: 0.25"

This is a wonderful enhancement to the item presently being discussed.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum construction

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Setup on Rimfire 28mm Motor

This item is often bought with the above pointed out item.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 8"
Pitch: 6
Center inner size: 0.25"

Get this item to enhance the one you are reading about.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made utilizing a pultrusion procedure. This method
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, enabling a higher fiber (60%) to resin (nylon binder)
    density. Supplying considerably higher strength and stiffness than
    glass filled nylon.
The added stiffness is beneficial to control of vibration
    resonance response.
The higher strength enables the usage of thinner cross-sections,
    beneficial to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props need balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Center Thickness: 0.40"
Center Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.