APC 12x6 Sport Propeller

This is a 12x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon construction reduces rotating mass for
    greater output and longer life.
Reinforcing carbon fibers assist keep real, consistent pitch at
    Any RPM.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props need balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECS:
Length: 12" Pitch: 6
Density at center: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" stands for the production run in which it was made.

Get this item to boost the one you are reading around.

11x6 Sport Propeller

This is a 11x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon construction reduces rotating mass for
    greater output and longer life.
Reinforcing carbon fibers assist keep real, consistent pitch at
    any rpm.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props need balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 11" Pitch: 6
Density at center: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" mean the production run in which this prop was made.

The listed below item additionally pairs actually well with the item being gone over.

13x6 Sport Propeller

This is a 13x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon construction reduces rotating mass for
    greater output and longer life.
Reinforcing carbon fibers assist keep real, consistent pitch at
    any rpm.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props need balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 13" Pitch: 6
Density at center: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" represents the production run in which the prop was made.

This is a great addition to the item currently being gone over.

2 1/4" Spinner (2 Blade) Black

This is the Dubro 2-1/4" Diameter Black Spinner.

FEATURES:
Constructed of 100% Virgin Nylon for maximum strength.
Pre-trimmed for 2 blade propeller.
Uses a unique nylon insert lock design for connecting the backplate
    and spinner-giving a solid and safe and secure hold.
Four shaft adapters, 6mm, 1/4", 7mm, 5/16", removes need to drill
    out backplates.

INCLUDES:
One Dubro 2-1/4" Diameter Black Spinner with backplate, 4 shaft
    adapters, and 2 3.5mm x 18mm socket head cap screws.

REQUIRES:
Aligning pins in nose cone to backplate and fastening into pre-
    set up locknuts with the 2 socket head cap screws.
7/64" ball driver

SPECS:
Diameter: 2.25" (57mm) at base
Length: 2.44" (62mm) from backplate to tip