APC 11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECS:
Diameter: 11"
Pitch: 7
Center inner size: 0.25"

The below product likewise pairs really well with the product being talked about.

11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 11" (279mm)
Pitch: 8
Center inner size: 0.25" (6.3mm)

Below is a excellent product that several others have actually purchased the very same time.

10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For use on Electric powered airplane

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that fit into propeller center to permit
for various motor shaft diameters.

INCLUDES:
One composite propeller
5 composite adapter rings
Guideline sheet

REQUIRES:
All props need balancing. The Top Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer required, utilize GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Diameter: 10" (250mm)
Pitch: 6
Center inner size: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

COMMENTS:
This propeller ought to not be utilized on gas or radiance engines.

This product is often acquired with the above stated product.



Designed for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
Three male bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Diameter: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female adapter order GPMM3113

Below is a excellent product that several others have actually purchased the very same time.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is also known as a JST connector.

FEATURES:
Designed for use with the majority of Park Flyer ElectriFly electronics
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

CONSISTS OF:
2 Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male connectors with wire, use GPMM3106.
This adapter can be utilized to replace BEC-type connectors.