APC 11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adjuster rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props need balancing, this is VERY important, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECIFICATIONS:
Size: 11"
Pitch: 7
Hub inner diameter: 0.25"

The listed below product likewise pairs really well with the product being talked about.

11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adjuster rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props need balancing, this is VERY important, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 11" (279mm)
Pitch: 8
Hub inner diameter: 0.25" (6.3mm)

Right here is a wonderful product that lots of others have bought at the same time.

10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For use on Electric powered airplane

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that suit propeller hub to enable
for different motor shaft diameters.

INCLUDES:
One composite propeller
Five composite adapter rings
Instruction sheet

REQUIRES:
All props need balancing. The Top Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer required, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Size: 10" (250mm)
Pitch: 6
Hub inner diameter: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

COMMENTS:
This propeller ought to not be utilized on gas or glow engines.

This product is frequently gotten with the above mentioned product.



Created for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
3 male bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .47" (12mm)
Size: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female adapter order GPMM3113

Right here is a wonderful product that lots of others have bought at the same time.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is also known as a JST connector.

FEATURES:
Created for use with many Park Leaflet ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality warranty

INCLUDES:
Two Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 19mm (overall)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male adapters with wire, use GPMM3106.
This adapter can be utilized to replace BEC-type adapters.