APC 10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For usage on Electric powered airplane

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adapter rings that fit into propeller center to enable
for various motor shaft diameters.

INCLUDES:
One composite propeller
Five composite adapter rings
Guideline sheet

REQUIRES:
All props require balancing. The Leading Flite Power Point Propeller
Balancer (TOPQ5700) can be used for this purpose.
If prop reamer required, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Diameter: 10" (250mm)
Pitch: 6
Center inner size: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

COMMENTS:
This propeller ought to not be used on gas or glow engines.

This item is frequently acquired with the above mentioned item.

11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECS:
Diameter: 11"
Pitch: 7
Center inner size: 0.25"

Often acquired with the item that you are currently checking out.



Designed for usage with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
Three male bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Diameter: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female port order GPMM3113

Often acquired with the item that you are currently checking out.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is likewise called a JST connector.

FEATURES:
Designed for usage with many Park Leaflet ElectriFly electronic devices
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

CONSISTS OF:
Two Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male adapters with wire, usage GPMM3106.
This port can be used to change BEC-type adapters.

Often acquired with the item that you are currently checking out.

10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 10"
Pitch: 5
Center inner size: 0.25"