APC 10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For use on Electric powered aircraft

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that suit propeller hub to allow
for different motor shaft diameters.

INCLUDES:
One composite propeller
Five composite adapter rings
Direction sheet

NEEDS:
All props require balancing. The Leading Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer required, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Size: 10" (250mm)
Pitch: 6
Center inner size: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

REMARKS:
This propeller needs to not be utilized on gas or glow engines.

This product is regularly purchased with the above mentioned product.

11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECS:
Size: 11"
Pitch: 7
Center inner size: 0.25"

Often purchased with the product that you are presently reviewing.



Developed for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
Three male bullet ports

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Size: .14" (3.5mm) outside

REMARKS:
For the 3.5mm female port order GPMM3113

Often purchased with the product that you are presently reviewing.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Developed for use with the majority of Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality assurance

CONSISTS OF:
Two Female 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

REMARKS:
For the male ports with wire, use GPMM3106.
This port can be utilized to replace BEC-type ports.

Often purchased with the product that you are presently reviewing.

10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 10"
Pitch: 5
Center inner size: 0.25"