APC 10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 10"
Pitch: 5
Hub inner diameter: 0.25"

Often bought with the product that you are presently checking out.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide surface area location, gold-plated terminals
Reverse polarity protection makes it difficult to connect backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Secure, favorable locking spring loaded terminals for constant
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One black female plastic port
One black male plastic port
Two sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins

This product compliments the main item right here.

Prop Adapter with Collet, 4mm




This is a fantastic addition to the product presently being discussed.

10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For usage on Electric powered aircraft

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that fit into propeller hub to permit
for different motor shaft diameters.

INCLUDES:
One composite propeller
Five composite adapter rings
Guideline sheet

NEEDS:
All props require balancing. The Top Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer required, utilize GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Size: 10" (250mm)
Pitch: 6
Hub inner diameter: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

REMARKS:
This propeller must not be utilized on gas or radiance engines.

Want another wonderful product to match the above pointed out product?

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with accessories)

This product is frequently bought with the above pointed out product.

10x4.5 Multi Rotor Pusher Propeller

This is the 10x4.5 MR Multi-Rotor Pusher Propeller from APC.
**Not for usage with gasoline engines.**

FUNCTIONS:
Created for counterclockwise rotating only
Composite nylon construction, gray in color
Particularly developed for multi-rotor applications
Bridges the space in between APC's Thin Electric and Slow Leaflet props
MR series is lighter than the Thin Electrics, with a greater RPM
    capability than Slow Flyers

INCLUDES:
10x4.5 MR Multi-Rotor Pusher Propeller from APC

SPECS:
Hub Size: 0.65" (16.51mm)
Hub Thickness: 0.35" (8.89mm)
Shaft Size: 1/4" (6.35mm)
Weight: 0.53oz (15.02g)
Maximum RPM Limitation: 105,000/prop diameter (inches)

REMARKS:
Order APCQ0601 for LPAR06E Adapter Rings