Align Tail Boom Brace

Requirements:
Tail boom brace end x 4
Tail boom brace x 2(Φ2x180mm carbon fiber)

Get this product to enhance the one you read around.

205D Carbon Fiber Blades

Replaced H25072

Requirements:
Forming: Balanced wing
Length:205mm
Width:3mm
Shaft Diameter:2mm
Weight:14g/set

Get this product to enhance the one you read around.

Torque Tube

Usage for all T-REX 250 class machine.

Requirements:
Tail boom ? 1
Torque tube ? 1
Torque tube end ? 2
Torque tube bearing holder ? 1
Bearing MR63ZZ ? 1(Φ3xΦ6x2.5mm)
Weight:8.88g

Lots of others have actually gotten this product along with the product that you are presently reading about.

Torque Tube Rear Drive Gear Set

Usage for T-REX 250PRO.

Requirements:
250PRO Tail rotor shaft assembly x 2
250PRO Long umbrella gear x 2

Right here is another product that praises the product being reviewed.

Tail Boom/Black

Requirements:
Tail boom x 2(Φ7.9xΦ8.5x241.7mm)
Tail control guide x 2
Rudder control rod x 1(Φ1.2x210mm)
Ball link x 2

You will certainly like this product if you have the product earlier pointed out.

Landing Skid Set

Bump Resistance landing skid and features stiff.

Requirements:
Hexagonal screw hole 1.3mm
Skid pipeline x 2(Φ2.9xΦ3.5x111mm)
Landing skid x 2
Skid pipeline end cap x 4
Socket button head self tapping screw x 4(T1.5x5mm)
Landing skid nut x 4(Φ3.4xΦ5.5x6mm)
Antena pipeline x 1(Φ1.5xΦ3x250mm)

This product is frequently gotten with the above discussed product.

Canopy Nut

Requirements:
250 canopy nut x4

Frequently gotten with the product that you are presently reading about.

New Main Drive Gear/120T

Newly designed primary gear mount to simplify gear replacement, and enhance general aesthetics of primary gear system.

Specifications:
New primary drive gear(120T) x 2
Main gear case x 1
Bearing 683 x 1(Φ3xΦ7x2mm)
One-way bearing HF0306 x 1(Φ3xΦ6.5x6mm)
Cross screw x 4(T1.5x4mm)

Lots of others have actually gotten this product along with the product that you are presently reading about.

250PRO Tail Linkage Rod

Usage for T-REX 250PRO.

Devices:
250PRO Control rod x 1
250 Tail control guide x 2
250 Rod end x 2
Weight:5g

The below product likewise pairs truly well with the product being reviewed.

205mm Main Blade Set

This is a replacement Align 205mm Main Blade Set, and is planned for use with the Align T-Rex 250 helicopter.

Specifications:

Forming: Balanced wing

Length: 205mm

Width: 3mm

Shaft Diameter: 2mm

Weight: Approx. 20.4g/set



This product praises the main item here.

DS410 Servo Horn

Like K10449.
Suitable for servos of ALIGN DS410/DS420.

Requirements:
Servo rudder piece x 4
Set screw x 1

Right here is another product that praises the product being reviewed.

Feathering Shaft

Requirements:
Feathering shaft x 2
Washer x 2(Φ2xΦ5.7x0.5mm)
Spacer x 2(Φ2.5xΦ4.5x0.2mm)
Socket screw x 2(M2x5mm)