Align Swashplate Leveler

Usage for T-REX 550/600/700/800 all class machine.

Specifications:
Swashplate system corrector ? 1
Collar ? 1(Φ13.5xΦ10x20.5mm)
M3 Set screw ? 1(3x3mm)

Get this product to enhance the one you read around.

AP800 Digital Pitch Gauge

This is the Align AP800 Digital Pitch Gauge. Developed by Align's R&D group, the AP800 digital pitch gauge is appropriate for flybar and flybarless helicopters and features an auto-detecting Horizontal level, and the outcomes are displayed through a high contrast LCD screen, supplying a basic and precise way to determine pitch angles.
Features:
Auto-detecting Horizontal level.
Uses backlighting LCD keep track of.
No and Lock function.
Noticeable pitch range: -90? ~ 90?.
Automatic screen rotation.
Suitable for 200~800mm main blades.
Build-in energy saving function, power shuts down after 3 minutes with no movement.
Specifications:

Body Dimension: 108x53.9x16mm

Suitable blade width: 20mm~74mm

Noticeable pitch range: ?90?

Resolution: 0.1?

Battery: 2x CR 2032 Lithium

Weight: 38g (consisting of battery)

This product compliments the main item right here.

Servo line Color Black & Green

Aiming to tidy up the look of your helicopter, aircraft of RC vehicle & protect your servo lines from chaffing? Servo Line Covering is an easy way to protect your servo wires, adding a tidy, aesthetic look to your RC machine, and can be installed in a matter of minutes. Choose from our amazing line of diverse colors to include an entire make over to your RC machine!

Included In Plan:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply eliminate your servo(s) from the receiver, determine the length of covering you will require for your servo wire(s), and open one end of the covering and insert the servo terminal within. It works best to "inch worm" your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off a suitable sized piece of the included heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat weapon to shrink it down around the covering, hence offering you a flush, tight fit over the formerly frayed servo covering. Do the exact same with the end of your servo wire, being careful to leave the terminal bare so it can quickly plug into your receiver. Likewise, make certain to remember of the servo wire polarity if you cover the full wire – this will ensure that you will understand exactly what direction to plug your servo terminal into your receiver.