Align T-REX700E PRO DFC Super Combo

Just 1 Left! When they are gone, they're gone!

This is the Align T-REX 700E PRO DFC Flybarless Super Combo Kit. This incredible package consists of not just the T-REX 700E DFC PRO Kit, but also a 3K Carbon Fiber Tail Boom and an Aluminum Tail Boom, an updated 700 3G Carbon Fiber Blade Set and an updated 105mm 3K Carbon Fiber Tail Blade Set. In addition, an Align 520kV 800MX Brushless Motor, 3GX Programmable Flybarless System, 3 DS615 Cyclic Servos, one DS655 Tail Servo, with a Castle Creations ICE2 HV 120 brushless ESC and a 6A External BEC included to round off this outstanding very combination.

The T-REX 700E PRO DFC design is equipped with 700 3G carbon fiber primary blades that have actually been established for extreme 3D flight, delivering dexterity and stability, in addition to an updated paint plan. The increased blade rigidness enhances anti-torsion characteristics throughout flight, and the updated airfoil decreases turbulence near the blade suggestion, decreasing blade noise and power loss. The included 800MX motor is an efficient, yet superior power source that provides excellent torque, low existing draw and lowered operating temperature levels. In addition an updated fiberglass canopy with superior aerodynamic qualities assists to lower wind resistance and uses a 4 point anti-vibration mounting system for quick setup and removal. The Align T-REX 700E PRO DFC Flybarless Super Combo consists of top notch equipment for requiring helicopter enthusiasts, and will amaze even the most passionate pilots.

700E PRO DFC Features:

Equipped with the low CG DFC rotor head, exhibits thrilling 3D performance and inconceivable flight speed
800MX motor features high performance, superior power, excellent torque, low existing draw and low temperature level; it can preserving consistent torque and head speed through continuous 3D maneuvers
Redesigned design swash anti-rotation guide with embedded anti-wear material, effectively lessen the wear in between swashplate long ball and guide
Makes use of composite carbon material combination technique on frame structure for CCPM servos. Redesigned CCPM direct servo linkage
Equipped with updated high strength CNC M1 helical primary gear and tail drive bevel gear assembly, including strengthened total gear structure and increased gear density, effectively enhances gear's anti torsion capability to prevent gear from deforming under extreme power, decreasing gear wear and power loss
Equipped with redesigned 700 3G carbon fiber primary blades created particularly for extreme 3D flights, including dexterity and stability, and updated graphics paint plan
High quality gearbox design, integrated with updated dual point installed tail pitch control assembly to lessen slop and increase rudder control precision
Redesigned tail blade created to sustain optimal tail locking performance under high head speed and extreme flight conditions
Redesigned design twist around airbrushed fiberglass canopy, with aerodynamic kind to lower wind resistance. 4-point anti-vibration mounts for quick install and removal

3GX Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The dramatically enhanced performance will create an instant influence on any enthusiasts.
The 3GX is currently the tiniest and lightest flybarless system on the market and features 2 ports to directly connect Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions using the computer system setup software application directs the user through an action by step setup procedure, allowing for quick setups without leaving out any actions.
With the soon to be launched Bluetooth connectivity package, the 3GX can be set wirelessly from a PC. Ultimately there will also be smartphone apps enabling live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, decreasing electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, enabling pilots to accomplish the most optimal setup for their helicopter without the guesswork.
3 levels of flight mode are readily available to supply the perfect feel for novice and advanced pilots.
Custom specifications have actually been established to permit pilots to fine tune many swashplate and rudder settings and a settings export feature enables custom settings to be shared amongst pals.
The 3GX features the highest spec gyroscope sensors, enabling it to be used in the harshest conditions. The dual axis plus rudder sensor dramatically enhances swashplate and rudder correction precision and will be felt when hovering, in addition to throughout aerobatic regimens.
Ideal for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant characteristics are evident even when installed with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, along with entirely re-written firmware. The result is a dramatic improvement in stability that matches a flybarred helicopter, while supplying explosive dexterity.
With a built in pirouette compensation function, the 3GX is able to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with precision.
Rudder control resembles the high-end GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder response characteristics, enabling consistent rudder feel even under high speed conditions. This excellent control feel will permit pilots of all ability levels to experience the perfect combination in between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses a total of 10 sensors, make sure positioning of the helicopter with superior accuracy and supplying the supreme solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type recognition

700E PRO DFC Requirements:
Length: 1350mm
Height: 360mm
Width: 208mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Rotor Diameter: 281mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.73
Weight (With Motor): 3310g

3GX Specifications:
Running Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm Size
Weight: 11g
Optimum working voltage: 8.5V

Consists of:

(1) T-REX 700E PRO DFC Kit
(1) 3K Carbon Fiber Tail Boom
(1) 790 3G Carbon Fiber Blade Set
(1) 800MX Brushless Motor (520kV)
(1) 3GX Flybarless System
(3) DS615 Servo
(1) DS655 Servo
(1) Aluminum Tail Boom
(1) Castle ICE2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge