Align T-REX450L DOMINATOR Super Combo(3S)

3GX Programmable Flybarless System:
Brand brand-new revamped 3GX works with a brand-new generation of multi function flybarless system. The dramatically enhanced performance will produce immediate effect on any lovers.
3GX is presently the tiniest and lightest flybarless system on the marketplace. Two ports to directly connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through an easy process. In addition, the 3GX can support all the CCPM swashplate system presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical showed instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
Assistance Bluetooth connection. With the soon to be launched Bluetooth connection kit, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed to decrease electronic wire mess.
Customized parameters have actually been opened up in 3GX to allow pilots to tweak various settings for swashplate and rudder. Settings export function allows custom settings to be shared among buddies.
3GX utilizes brand brand-new gyroscope sensing units of the highest requirements when compared with other flybarless systems presently on the marketplace, allowing it to be utilized under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction accuracy compared with last generation 3G. This is clearly obvious in stable hover as well as extremely aerobatic routines.
Appropriate for helicopter of all class from 250 to 800, radiance engine or electrical powered. The remarkable vibration resistant attribute appears even when mounted with more difficult double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The result is a remarkable stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive dexterity.
With integrated in pirouette payment function, 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are quickly achieved with accuracy.
3GX's rudder allows constant rudder feel even under high speed conditions. This outstanding control feel will allow pilot of all ability levels to experience the best combination between 3GX and helicopter.
Assistance with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize, hold position as well as elevation, as well as self-governing method point flights as well as return house.

3GX Programmable Flybarless System:
Running voltage variety:DC 3.5V~8.4V
Operating existing consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length: 705mm
Height: 205mm
Width: 110mm
Main Blade Lenght: 325mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 171mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10.08:4.24
Weight(w/o power system): 722g

Standard equipment:
3GX Flybarless System X 1 set
RCE-BL45X 45A Brushless ESC X 1
460MX Brushless Motor(3200kv) X 1
DS416M Digital Servo X 3
DS525M Digital Servo X 1

Accessories:
T-REX 450L DOMINATOR Set X 1 set
3GX Flybarless System X 1 set
325D 3G Carbon Fiber Blades X 1set
RCE-BL45X 45A Brushless ESC X 1
460MX Brushless Motor(3200kv) X 1
DS416M Digital Servo X 3
DS525M Digital Servo X 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.3S Li-Po 2250mAh battery x 1