Align T-REX 800E PRO DFC Super Combo (GPRO)

Introducing:
The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights. The CCPM direct connect servo design, combined with DFC rotor head assembly, results in quickly, exact, and more direct control reaction. The frame material integration innovation is utilized on the landing equipments and vertical tail fin, producing a unique appearance not just making the T-REX 800E PRO DFC stick out, however likewise resulting in an ingenious design that includes structure rigidity along with lovely aesthetics.

Nothing was spared in the electronics components of the package: The mighty power of the 850MX(490KV) motor coupled with Castle Edge HV 160 speed controller for unrivaled power output; The brand-new CNC machined aluminum cased BL815H brushless high voltage cyclic servos coupled with BL855H rudder servo not just displayed top of the line servo aesthetic appeals, however likewise combine heat sink function and best efficiency in the market segment.

The T-REX 800E PRO DFC can be referred to as the present top of the line flagship representing Align?s remarkable line of product. Based on the pedigree of pure 3D flight, the latest design principle with absolute top of the line equipment, along with remarkable aesthetic appeals and attractive lines, the T-REX 800E PRO DFC will absolutely elevate the adrenaline in your blood!

Specification:
Length: 1490mm
Height: 402mm
Width: 204mm
Main Blade Length: 780mm
Main Rotor Diameter: 1740mm
Tail Rotor Diameter: 301mm
Motor Drive Equipment:12T
Main Drive Equipment:112T
Autorotation Tail Drive Equipment: 104T
Tail Drive Equipment: 22T
Drive Equipment Ratio: 1:9.33:4.37
Weight(With Motor): 4100g Accessories:
T-REX 800E PRO DFC Sets Set x 1
Gpro Flybarless system x 1 set
780 Carbon Fiber Blades x 1 set
BL815H High Voltage Brushless Servo x 3
BL855H High Voltage Brushless Servo x 1
3K Carbon Fiber Tail Boom x 1
850MX Brushless Motor(490KV) x 1
Castle EDGE HV 160 Brushless ESC x 1
115mm 3K Carbon Fiber Tail Blades x 1 set

Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 4500 ~ 5200mAh x 2
2S Li-Po 1900 ~ 2300mAh x 1

Gpro Programmable Flybarless System Includes :
LINE UP brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The freshly brand-new software application structure enhances system settlement, bring GPro up with exact and nimble reaction, as well as keep updated flying efficiency than ever.The most essential is that makes use of with newest iOS and Android APP can be easily and straight adjusted through smart phone while at the field. New human oriented user interface enables practical and quick setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with exact and nimble response.
Freshly brand-new software application procedure structure enhances system settlement and keep updated flying performance.
Utilizes with newest iOS and Android APP that GPro can be easily and straight adjusted through smart phone while flying outdoors.
New human oriented user interface enables practical and quick setup and installation.
Superior flying characteristic stay the very same flying control among T-REX 250~800 helicopters.
Full assistance receivers and satellites presently on the marketplace, consisting of S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System :
Running voltage range:DC 3.5V~8.4V
Running present consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support Please Click here for Align GPro Flybarless System
Please Click here for GPro Manuel Download
GPro Spektrum Binding
GPro Hardware Connection
GPro Parameter Setup
GPro Android APP Setup
GPro iOS APP Setup