Align T-REX 800E PRO DFC Super Combo (GPRO)

Introducing:
The T-REX 800E PRO DFC is an 800 class flagship designed particularly for 3D flights. The CCPM direct connect servo design, combined with DFC rotor head assembly, results in fast, accurate, and more direct control response. The frame material combination innovation is used on the landing gears and vertical tail fin, creating a unique look not just making the T-REX 800E PRO DFC stand out, however also resulting in an innovative design that encompasses structure rigidity along with lovely aesthetics.

Nothing was spared in the electronic devices parts of the kit: The magnificent power of the 850MX(490KV) motor paired with Castle Edge HV 160 speed controller for unequaled power output; The brand-new CNC machined aluminum cased BL815H brushless high voltage cyclic servos paired with BL855H rudder servo not just showed top of the line servo aesthetic appeals, however also combine heat sink function and best performance in the market segment.

The T-REX 800E PRO DFC can be referred to as the existing top of the line flagship representing Align?s superior line of product. Based upon the pedigree of pure 3D flight, the most recent design principle with absolute top of the line equipment, along with superior aesthetic appeals and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

Specification:
Length: 1490mm
Height: 402mm
Width: 204mm
Main Blade Length: 780mm
Main Rotor Size: 1740mm
Tail Rotor Size: 301mm
Motor Drive Equipment:12T
Main Drive Equipment:112T
Autorotation Tail Own Equipment: 104T
Tail Own Equipment: 22T
Own Equipment Ratio: 1:9.33:4.37
Weight(With Motor): 4100g Devices:
T-REX 800E PRO DFC Packages Set x 1
Gpro Flybarless system x 1 set
780 Carbon Fiber Blades x 1 set
BL815H High Voltage Brushless Servo x 3
BL855H High Voltage Brushless Servo x 1
3K Carbon Fiber Tail Boom x 1
850MX Brushless Motor(490KV) x 1
Castle EDGE HV 160 Brushless ESC x 1
115mm 3K Carbon Fiber Tail Blades x 1 set

Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1

Gpro Programmable Flybarless System Includes :
ALIGN brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The freshly brand-new software structure improves system compensation, bring GPro up with accurate and agile reaction, and also keep updated flying performance than ever.The most essential is that makes use of with most current iOS and Android APP can be quickly and directly adjusted through smart phone while at the field. New human oriented interface allows hassle-free and rapid setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with accurate and agile response.
Freshly brand-new software process structure improves system compensation and keep updated flying performance.
Utilizes with most current iOS and Android APP that GPro can be quickly and directly adjusted through smart phone while flying outdoors.
New human oriented interface allows hassle-free and rapid setup and installation.
Superior flying particular remain the very same flying control among T-REX 250~800 helicopters.
Full assistance receivers and satellites presently on the market, consisting of S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System :
Operating voltage variety:DC 3.5V~8.4V
Operating existing intake:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support Please Click here for Align GPro Flybarless System
Please Click here for GPro Manuel Download
GPro Spektrum Binding
GPro Hardware Connection
GPro Parameter Setup
GPro Android APP Setup
GPro iOS APP Setup