Align T-REX 800E PRO DFC Super Combo

Instruction(3GX Programmable Flybarless System) :
Brand name brand-new redesigned 3GX represents a brand-new generation of multi function flybarless system. The dramatically improved efficiency will produce immediate influence on any lovers.
3GX is presently the tiniest and lightest flybarless system on the marketplace. Two ports to straight connect Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through a basic procedure. In addition, the 3GX can support all the CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphical showed guideline on the computer setup software directs the user through a step by step setup procedure, permitting fast setups without omitting any steps.
Support Bluetooth connection. With the soon to be released Bluetooth connection set, 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps permitting live modifications to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to lower electronic wire clutters.
Custom criteria have actually been opened up in 3GX to enable pilots to tweak various settings for swashplate and rudder. Settings export feature allows custom-made settings to be shared amongst buddies.
3GX makes use of brand name brand-new gyroscope sensors of the greatest specs when compared to other flybarless systems presently on the marketplace, permitting it to be utilized under extreme conditions. Double axis plus rudder sensor dramatically enhances swashplate and rudder correction accuracy compared to last generation 3G. This is plainly obvious in stable hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electric powered. The remarkable vibration resistant attribute appears even when installed with harder double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The result is a significant stability improvement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.
With built in pirouette settlement function, 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting turns type of maneuvers are easily achieved with accuracy.
3GX's rudder allows constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the perfect integration in between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position as well as elevation, and even autonomous way point flights as well as return home.

Specification(T-REX 800E DFC) :
1. Geared up with the low CG DFC rotor head, efficiently lower wind resistance during flight, providing the most direct and accurate control feel back to the pilot, and exhibits exciting 3D efficiency and inconceivable flight speed.
2. Brand-new design swash anti-rotation guide with embedded anti-wear product, efficiently minimize the wear in between swashplate long ball and guide.
3. Geared up with brand name brand-new 780 3G carbonfiber primary blades developed specifically for severe 3D flights, including dexterity and stability, and brand-new graphics paint plan. The increased blade rigidness enhances anti torsion particular during flight, and the brand-new airfoil lessens turbulence near the blade tip, decreasing blade sound and power loss.
4. Brand name brand-new tail blade developed to sustain optimum tail locking efficiency under high head speed and severe flight conditions.
5. The shapely Support plate and brace are special design for T-REX 800E, efficiently increase the torsional strength of primary frame, under severe 3D maneuver, you can highly feel its strong support from its structure, thenew CNC machined aluminum electroplate red, is specific arranged in groups of 850MX motor, subtly bring theT-REX 800 trendy and metal appeal.
6. Ingenious composite of fiber product for landing equipment, special trendy shape, functional intensity and visual appeal are both ingenious design.
7. Utilizing competitive product and special imbedded technology for vertical tail, enhanced its structural strength and store texture effectively, lively color providing outstanding exposure.
8. Brand name brand-new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, allowing faster and more accurate control response.
9. Integrated servo mounts on the primary shaft bearing blocks, permitting cyclic servos to be installed straight onto the bearing blocks, which together with the composite product frame plates, creating a tidy and uncluttered appearance.
10. Uses composite carbon product integration method on frame structure for ease of upkeep and high rigidness. Increased front opening location to permit easier battery setup.
11. Ingenious sliding battery tray rails anchored into the 3K side frames, with trademarked spring loaded locking system, permitting fast battery gain access to as well as battery protection.
12. Top installed motor base bringing the motor's center of gravity more detailed to turning disc, enhancing 3D dexterity and permitting blade drafts to cool the motor efficiently.
13. Motor mount consists of 3rd bearing block to supply motor shaft support, efficiently lower torque caused shifts, and minimize equipment striping concern.
14. Uses high spec MOD1 CNC helical primary equipment and MOD 1 tail drive helical equipment to increase equipment mesh location, and minimize equipment sound during flight.
15. Top installed ESC platform to make the most of primary blades airflow for reliable cooling.
16. New light-weight H-shaped electric gadget retention system for protection, as well as ergonomically appropriate design to streamline operation .
17. 800MX functions high efficiency, remarkable power, outstanding torque, low current draw and low temperature level; it?s capable of keeping constant torque and head speed through continuous 3D maneuvers.
18. Brand name brand-new transmission with more structured design also enables easier disassembly.
19. High quality brand-new tail gearbox design, integrated with brand-new dual point installed tail pitch control assembly to minimize slops and increase rudder control accuracy.
20. High torque rated one way bearing base.
21. High accuracy bearing supported dual push point rudder control design.
22. High speed rated thrust bearings integrated into tail blade grips.
23. Geared up with 3rd bearing primary shaft support to increase rigidness, meeting the needs of severe 3D maneuvers.
24. Brand-new design wrap around airbrushed fiberglass canopy, with aerodynamic kind to lower wind resistance. 4 point anti-vibration mounts for fast install and removal.
25. New CNC aluminum alloy installing plate.

Users must have a particular concept of security to operate the R/C helicopters.
Be sure to check out and abide by associated safety notes of instruction manual prior to flying.

Spec(3GX Programmable Flybarless System) :
Running Temperature level:-20~65 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight:11g
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes original factory receiver)
Futaba S.BUS system support
Integrated in governor function
Maximum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Suitable with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization Spec(T-REX 800E DFC) :
Length: 1490mm
Height: 402mm
Width: 204mm
Main Blade Length: 780mm
Main Rotor Diameter: 1740mm
Tail Rotor Diameter: 301mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.37
Weight(With Motor): 4100g

Devices:
T-REX 800E PRO DFC Sets Set x 1set
3GX Flybarless system x 1
780 Carbon Fiber Blades x 1set
BL800H High Voltage Brushless Servo with CNC aluminum servo horns x 3
BL850H High Voltage Brushless Servo x 1
3K Carbon Fiber Tail Boom x 1
850MX Brushless Motor(520KV) x 1
Castle EDGE HV 160 Brushless ESC x 1
115mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 4500 ~ 5200mAh x 2
2S Li-Po 1900 ~ 2300mAh x 1