Align T-REX 800E DFC Flybarless Super Combo Helicopter Kit w/Motor, E

This is the Align T-REX 800E DFC Flybarless Super Combo Helicopter Package. This package includes an Align 750MX 450kV motor, a Castle ICE2 HV 120 Brushless ESC, three Align BL700H High Voltage Brushless Servos, one Align BL750H High Voltage Brushless Servo, 800 Carbon Fiber Rotor Blades, 115mm 3K Carbon Fiber Tail Blades and the incredible Align 3GX Flybarless System!

T-REX 800E DFC Functions: Designed particularly for aerial photography and cinematography
The long 800mm main blades offer remarkable flight stability and high payload capability
Equipped with DFC flybarless main rotor system; the exceptionally low CG design effectively reduces aerodynamic resistance and improves flight stability attributes
Carbon material integration innovation is used in the frame plate structure, leading to basic maintenance and operation convenience
The frame has an installing area for the optional Align aerial gimble system upgrade, which can be installed without any adjustments
Committed APS control unit and sensor unit installing platform to simplify setup
Ingenious moving battery tray rails anchored into the 3K side frame, supplying easy battery gain access to and protection
Top installed motor base, allowing blade drafts to cool the motor effectively
Motor install consists of 3rd bearing block to offer motor shaft assistance; effectively lowering torque induced shifts and decreased equipment striping problems
Utilizes high specification MOD1 112 tooth CNC helical main equipment and MOD 1 helical tail drive equipment to increase equipment mesh location, and reduce equipment noise throughout flight
Top installed ESC platform to make the most of main blades air flow for efficient cooling
New lightweight H-shaped electric device retention system for protection, along with ergonomically proper design to simplify operation
Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to significantly increase cooling impact, and improve total power output
Upgraded transmission with more streamlined design likewise permits simpler disassembly
High quality redesigned tail transmission design, combined with an upgraded dual point installed tail pitch control assembly to reduce slop and boost rudder control accuracy
High torque ranked one method bearing base
High accuracy bearing supported dual push point rudder control design
High speed ranked thrust bearings integrated into the tail blade grips
High grade painted fiberglass canopy with redesigned 4 point anti-vibration installing system to simplify setup
Upgraded CNC aluminum alloy installing plate

T-REX 800E Requirements:

Length: 1490mm

Height: 400mm

Main Blade Length: 800mm

Main Rotor Size: 1780mm

Tail Rotor Size: 301mm

Motor Drive Gear: 13T

Main Drive Gear: 110T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 22T

Drive Gear Ratio: 1:8.46:4.73

Weight (with Motor): 3516g

Flying Weight: 5400g

3GX Programmable Flybarless System Includes:

Upgraded 3GX represents a new generation of multi-function flybarless system. The significantly enhanced efficiency will create an instant influence on any enthusiast.
3GX is currently the tiniest and lightest flybarless system on the market and includes 2 ports to straight link Spektrum and JR satellite receivers, along with full assistance of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through a simple procedure. In addition, the 3GX can support all the CCPM swashplate systems currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic highlighted direction on the computer system setup software application directs the user through an action by action setup procedure, permitting quick setups without omitting any steps.
Support Bluetooth connectivity. With the soon to be launched Bluetooth connectivity package, 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live modifications to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed to lower electronic wire clutter.
A library of pre-configured 3GX settings particularly offered for T-Rex series of helicopters, allowing pilots to attain the most optimum setup for their helicopters.
3 levels of flight mode are offered on the 3GX to offer various understandings of starting and advanced pilots.
Custom specifications have been opened up in 3GX to allow pilots to fine tune many settings for swashplate and rudder. Settings export function permits custom settings to be shared amongst good friends.
3GX uses brand name brand-new gyroscope sensors of the highest specs when compared with other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor significantly improves swashplate and rudder correction accuracy compared with the last generation 3G. This is clearly visible in stable hover along with extremely aerobatic regimens.
Ideal for helicopters of all class from 200 to 700, glow engine or electric powered. The remarkable vibration resistant characteristic is evident even when installed with harder double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The outcome is a significant stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette payment function, 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flips kind of maneuvers are easily accomplished with accuracy.
3GX's rudder control is similar to the high end GP-780 gyro in that rudder level of sensitivity is catered particularly for the helicopter's rudder response attributes, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration in between 3GX and helicopter.
Extra peripherals prepared for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly offered position hold gyro system uses only 6 sensors, 3GX?s amount to of 10 sensors make sure positioning of helicopter with remarkable accuracy, supplying the supreme service for aerial photography or other unique functions.

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V

T-REX 800E DFC Super Combo Includes: (1) T-REX 800E DFC Packages Set


(1) 3K Carbon Fiber Tail Boom


(1) 800 Carbon Fiber Blades


(1) 750MX Brushless Motor(450KV)
(1) 3GX Flybarless system


(3) BL700H High Voltage Brushless Servo


(1) BL750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC


(1) 115mm 3K Carbon Fiber Tail Blades 

Needed to Total:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
Dial Pitch gauge
(2) 6S LiPo Battery Pack, 4500 ~ 5200mAh
(1) TWO LiPo Battery Pack, 1900 ~ 2300mAh