Align T-Rex 700XN Dominator Nitro KIT

T-REX 700XN embraces the new direct to swashplate servo style, compared with previous generation T-REX 700N double push-pull mode control, offering precise and fast control! With 700EFL Flybarless Rotor Head System makes use of severe low CG style, effectively decreases resistance during 3D maneuvers, increased flight responsiveness and accuracy. Developed to maintain a 90-degree symmetrical angle in between the Rotor Grip Arms and Linkage Rods for remarkable and stable flight efficiency. Engineered Narrow Body Design efficiently decrease gear abrasion and frame contortion during flight. T-REX 700XN maintain the correct Center of mass CG, moving the engine forward enabled the fuel tank to be placed in the center of the primary shaft to maintain consistent CG as the fuel level modifications during flight.
The new steel alloy clutch liner is long lasting with temperature control preventing the blowing up clutch liner or breaking clutch real estate, the life time is over 1000 flights. Receiver install offers cable television and circuitry security, easy to maintain and assemble by removing a few screws from the mainframe.
The new generation of T-REX 700XN has a variety of ingenious style, detonating your inner soul and when again feeling the initial passion!

After performing many tests to figure out the most efficient aerodynamic canopy we are happy to launch this brand name new light-weight canopy! This ultimate canopy made of glass and carbon fiber is light-weight and achieves finest vibrant efficiency. Likewise a new distinct paint plan for the latest member of the T-REX family.

Specifically designed for a nitro helicopter to provide remarkable flight stability, and improve the power for much better control. A brand-new blonde yellow layering paint plan creates a trendy look.

Landing skid is tilted 5 degree forward which enhances crashworthiness.

Engineered Narrow Body Design efficiently decrease gear abrasion and frame contortion during flight. The Align T-REX new narrow body style is stronger and increases flight durability.

The new direct to swashplate servo style offers precise and fast control. Developed to maintain a 90-degree symmetrical angle in between the Rotor Grip Arms and Linkage Rods for remarkable and stable flight performance.

Align Advanced Metal Swashplate strongly connects to the rotor holder grips avoiding rotor head disengagement during intense flight. 2 optional linkage ball installing holes permit personal selection of resolution based upon desired flight performance.

Two new CNC blade holder arms are extremely tidy and smooth in appearance. After a number of adjustments, we are releasing the new 3D Blade Holder Arms allowing for exceptional great accuracy control and effectively doubling flight stability, promoting boundless flight possibilities.

Receiver install offers cable television and circuitry security, easy to maintain devices by removing a few screws from the mainframe.

Maintaining the correct Center of mass CG is very important for helicopters. After comprehensive Research and Development, moving the engine forward enabled the fuel tank to be placed in the center of the primary shaft. This optimal place for the fuel tank permits the 700XN to maintain consistent CG as the fuel level modifications during flight.

The idler pulley helical gear enhances rotation stability and effectively decreases the load from the equipments while increasing bearing capacity. The equipments made of steel alloy are high strength and use resistant.
The new steel alloy clutch liner is long lasting with temperature control preventing the blowing up clutch liner or breaking clutch housing.

CNC metal support plate and brace line up with frame installing bolts effectively increasing the torsional strength of the mainframe. Under severe 3D maneuvers, you can feel the improved support to the mainframe. Likewise, the plate aids with engine cooling and adds additional security for the motor.

High voltage output: 6A 7.4V BEC with down / guideline system for stable power to the CCPM server channel for receivers and servos. Consists of a built-in one-button push glow plug igniter removing the trouble of utilizing conventional electric clip plug on igniters. Likewise increased external high-frequency filter capacitance to effectively minimize the interference produced by external noise; such as high-speed and high torque servos.

An integrated motor installing bracket allows for efficient heat dissipation from the motor. The remarkable Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for visually pleasing appearance.

Integration of POM Polyacetal into the CNC Aluminum alloy Anti-Rotation Bracket decreases friction in between the linkage ball and the metal Anti-Rotation Bracket while enhancing the performance and accuracy of servo performance.

Dual-sided tail servo install enhances the whole frame structure while allowing for much better availability when servicing the 700XN.
New 8mm Carbon Fiber Tail Boom Brace are stronger and lighter weight to improve tail control.

Brand new strengthened accuracy style with high-end M4x8 hexagonal screw upgrade. The new stiff style enhances and enhances the whole structure improving tail efficiency for all pilots.

 Electric devices

B6TX 2 In 1 Voltage Regulator Combination x 1

Specification

Length: 1346mm
Height: 384mm
Width: 202mm
Main Blade Length: 700mm
Main Rotor Diameter: 1570mm
Tail Rotor Diameter: 281mm
Motor Drive Gear:13T
Main Drive Gear:107T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 8.23:1:4.73
Fuel Tank Capacity: 630cc.
Launch Weight: Approx. 4540gIncluded

T-REX 700XN Kit Set x 1 set
700 Carbon Fiber Blades x 1 set
106mm 3K Carbon Fiber Tail Blades x 1 set
B6TX 2 In 1 Voltage Regulator Combination x 1

Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Digital Pitch Gauge
CCPM Servo x 3
Tail Servo x 1
Flybarless System x 1
Requirement servo(for throttle) x 1 
Engine starter x 1
Fuel pump x 1
91~105 Engine x 1
Engine fuel x 1
Guv Sensor x 1