Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combo Helicopter Set. This extraordinary plan includes not just the T-REX 700E DFC Set, however likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This package likewise includes an Align 530kV 750MX brushless motor, the 3GX flybarless system, 3 BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, in addition to a Castle Creations ICE2 HV 120 brushless ESC, offering you with an incredible helicopter package and an equally excellent electronic devices plan all in the same box.
700E DFC Features:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor head to successfully minimize wind resistance during flight and supply the most direct and precise control feel back to the pilot, offering exciting 3D performance and unimaginable flight speed.
CCPM direct servo linkage design gets rid of the weight of a double push-pull linkage system, for fast response and precise control.
Integrated servo installs on the primary shaft bearing obstructs allow the cyclic servos to be installed straight to the bearing obstructs, and when integrated with the composite material frame plates, produces a tidy and uncluttered look.
The frame makes use of an integrated composite carbon material strategy for ease of maintenance and high rigidity, while the increased front opening location permits easy battery installation.
The ingenious moving battery tray rails are imbedded into the 3K side frames, with a trademarked spring packed locking mechanism allowing for quick battery gain access to in addition to battery protection.
A top installed motor base brings the motor's center of mass closer to the turning disc, enhancing 3D dexterity and allowing blade drafts to successfully cool the motor.
The motor mount system includes a 3rd bearing block to supply improved motor shaft assistance, reducing torque shift and minimizing the risk of striping a gear.
The drive train includes a high specification MOD1 112T CNC helical primary gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and minimize gear sound during flight.
A top installed ESC platform utilizes the primary blade airflow for efficient ESC cooling.
The lightweight H-shaped electric device retention system provides protection, in addition to an ergonomically right design to simplify operation.
The consisted of Align 750MX brushless motor includes a ribbed case and fan to significantly increase cooling and enhance total power output.
The transmission includes a structured design and permits easy disassembly.
The high quality tail transmission design, integrated with a dual point installed tail pitch control assembly assists to minimize slop and boost rudder control.
The high torque rated one way bearing base, bearing supported dual push point rudder control design, high speed rated tail blade grip thrust bearings and a 3rd bearing primary shaft assistance were consisted of to endure the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing mechanism to allow uncomplicated canopy setup.
3GX Characteristics:
Redesigned 3GX represents the next generation of multi function flybarless systems. The significantly improved performance will create an immediate impact on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the market and includes 2 ports to straight connect Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup just in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions utilizing the computer system setup software application directs the user through a step by action setup procedure, allowing for quick setups without leaving out any steps.
With the soon to be released Bluetooth connection package, the 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live modifications to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, allowing pilots to achieve the most optimum setup for their helicopter without the guesswork.
Three levels of flight mode are offered to supply the best feel for beginner and advanced pilots.
Custom criteria have been established to allow pilots to fine tune many swashplate and rudder settings and a settings export feature permits customized settings to be shared amongst friends.
The 3GX includes the highest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The dual axis plus rudder sensing unit significantly improves swashplate and rudder correction accuracy and will be felt when hovering, in addition to during aerobatic routines.
Suitable for 200 to 700 class helicopters, radiance engine or electric powered.
The vibration resistant characteristics are evident even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The outcome is a significant improvement in stability that rivals a flybarred helicopter, while offering explosive agility.
With a built in pirouette settlement function, the 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
Rudder control is similar to the high end GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all skill levels to experience the best combination in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of a total of 10 sensors, guarantee positioning of the helicopter with exceptional accuracy and offering the supreme option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support as much as 6 servos
Automatic servo type recognition
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 104T

Tail Own Equipment: 22T

Own Equipment Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V
Consists of:
(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Complete:
7-channel or more helicopter radio system
(2) 6S Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge