Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combo Helicopter Kit. This unbelievable package includes not just the T-REX 700E DFC Kit, however also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This set also includes an Align 530kV 750MX brushless motor, the 3GX flybarless system, three BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, as well as a Castle Creations ICE2 HV 120 brushless ESC, supplying you with an extraordinary helicopter set and a similarly remarkable electronic devices package all in the very same box.
700E DFC Features:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor visit effectively decrease wind resistance throughout flight and supply the most direct and accurate control feel back to the pilot, supplying exhilarating 3D performance and unimaginable flight speed.
CCPM direct servo linkage design removes the weight of a double push-pull linkage system, for fast reaction and accurate control.
Integrated servo mounts on the main shaft bearing obstructs permit the cyclic servos to be mounted straight to the bearing obstructs, when integrated with the composite material frame plates, produces a tidy and uncluttered look.
The frame uses an integrated composite carbon material method for ease of maintenance and high rigidness, while the increased front opening area permits simple battery installation.
The ingenious moving battery tray rails are imbedded into the 3K side frames, with a trademarked spring packed locking mechanism enabling quick battery access as well as battery protection.
A top mounted motor base brings the motor's center of gravity closer to the turning disc, improving 3D agility and allowing blade drafts to effectively cool the motor.
The motor install system includes a 3rd bearing block to supply better motor shaft support, lowering torque shift and minimizing the danger of striping a gear.
The drive train includes a high specification MOD1 112T CNC helical main equipment and a helical cut MOD1 tail drive equipment to enhance the equipment mesh and minimize equipment sound throughout flight.
A top mounted ESC platform uses the main blade air flow for efficient ESC cooling.
The lightweight H-shaped electric gadget retention system provides protection, as well as an ergonomically right design to streamline operation.
The consisted of Align 750MX brushless motor includes a ribbed case and fan to drastically increase cooling and enhance total power output.
The gear box includes a structured design and enables simple disassembly.
The high quality tail transmission design, integrated with a dual point mounted tail pitch control assembly helps to minimize slop and boost rudder control.
The high torque rated one way bearing base, bearing supported dual push point rudder control design, high speed rated tail blade grip thrust bearings and a 3rd bearing main shaft support were consisted of to withstand the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration mounting mechanism to permit uncomplicated canopy installation.
3GX Features:
Revamped 3GX represents the next generation of multi function flybarless systems. The drastically improved performance will develop an immediate effect on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the market and includes two ports to straight connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically showed guidelines using the computer setup software directs the user through a step by step setup process, enabling quick setups without leaving out any steps.
With the soon to be launched Bluetooth connectivity set, the 3GX can be configured wirelessly from a PC. Ultimately there will also be smartphone apps allowing live adjustments to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, lowering electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, allowing pilots to accomplish the most optimal setup for their helicopter without the guesswork.
Three levels of flight mode are readily available to supply the best feel for newbie and advanced pilots.
Custom specifications have been established to permit pilots to fine tune numerous swashplate and rudder settings and a settings export function enables custom settings to be shared among friends.
The 3GX includes the highest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The dual axis plus rudder sensing unit drastically improves swashplate and rudder correction accuracy and will be felt when hovering, as well as throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, radiance engine or electric powered.
The vibration resistant attributes appear even when mounted with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to entirely re-written firmware. The result is a dramatic enhancement in stability that matches a flybarred helicopter, while supplying explosive agility.
With a built in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily performed with precision.
Rudder control resembles the luxury GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder action attributes, allowing consistent rudder feel even under high speed conditions. This excellent control feel will permit pilots of all ability levels to experience the best combination in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system uses an overall of 10 sensors, ensure positioning of the helicopter with remarkable accuracy and supplying the ultimate option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 104T

Tail Drive Equipment: 22T

Drive Equipment Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V
Consists of:
(1) T-REX 700E DFC Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Needed to Total:
7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge