Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combination Helicopter Set. This amazing bundle includes not just the T-REX 700E DFC Set, but likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit likewise includes an Align 530kV 750MX brushless motor, the 3GX flybarless system, 3 BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, as well as a Castle Creations ICE2 HV 120 brushless ESC, providing you with an unbelievable helicopter kit and an equally excellent electronics bundle all in the very same box.
700E DFC Functions:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor visit efficiently decrease wind resistance throughout flight and supply the most direct and precise control feel back to the pilot, providing exciting 3D performance and unthinkable flight speed.
CCPM direct servo linkage style eliminates the weight of a double push-pull linkage system, for quick response and precise control.
Integrated servo mounts on the main shaft bearing blocks allow the cyclic servos to be installed straight to the bearing blocks, and when combined with the composite product frame plates, develops a clean and uncluttered look.
The frame makes use of an integrated composite carbon product technique for ease of upkeep and high rigidity, while the increased front opening location allows for basic battery installation.
The ingenious moving battery tray rails are imbedded into the 3K side frames, with a patented spring packed latching mechanism allowing for quick battery access as well as battery protection.
A top installed motor base brings the motor's center of mass more detailed to the turning disc, improving 3D dexterity and enabling blade drafts to efficiently cool the motor.
The motor install system features a third bearing block to supply better motor shaft assistance, minimizing torque shift and lessening the risk of striping a gear.
The drive train features a high spec MOD1 112T CNC helical main gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and minimize gear noise throughout flight.
A top installed ESC platform uses the main blade airflow for reliable ESC cooling.
The light-weight H-shaped electrical device retention system provides protection, as well as an ergonomically correct style to simplify operation.
The included Align 750MX brushless motor features a ribbed case and fan to dramatically increase cooling and enhance overall power output.
The transmission features a structured style and allows basic disassembly.
The high quality tail gearbox style, combined with a double point installed tail pitch control assembly helps to minimize slop and boost rudder control.
The high torque rated one way bearing base, bearing supported double push point rudder control style, high speed rated tail blade grip thrust bearings and a third bearing main shaft assistance were included to hold up against the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration installing mechanism to allow effortless canopy setup.
3GX Features:
Redesigned 3GX represents the next generation of multi function flybarless systems. The dramatically improved performance will create an immediate effect on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and features two ports to straight link Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated guidelines using the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
With the quickly to be released Bluetooth connection kit, the 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, minimizing electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, enabling pilots to accomplish the most optimum setup for their helicopter without the guesswork.
Three levels of flight mode are readily available to supply the ideal feel for newbie and advanced pilots.
Custom parameters have been established to allow pilots to tweak various swashplate and rudder settings and a settings export function allows custom settings to be shared amongst friends.
The 3GX features the greatest spec gyroscope sensing units, enabling it to be used in the harshest conditions. The double axis plus rudder sensor dramatically enhances swashplate and rudder correction accuracy and will be felt when hovering, as well as throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant characteristics are evident even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The result is a significant improvement in stability that measures up to a flybarred helicopter, while providing explosive agility.
With an integrated in pirouette settlement function, the 3GX is able to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
Rudder control is similar to the high end GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder reaction characteristics, enabling constant rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all ability levels to experience the ideal integration in between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensing units, guarantee positioning of the helicopter with exceptional accuracy and providing the supreme service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type acknowledgment
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 104T

Tail Drive Equipment: 22T

Drive Equipment Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V
Includes:
(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Needed to Complete:
7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge