Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combination Helicopter Set. This incredible plan consists of not only the T-REX 700E DFC Set, but likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This set likewise consists of an Align 530kV 750MX brushless motor, the 3GX flybarless system, three BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, along with a Castle Creations ICE2 HV 120 brushless ESC, providing you with an unbelievable helicopter set and a similarly outstanding electronics plan all in the same box.
700E DFC Functions:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor visit effectively reduce wind resistance throughout flight and provide the most direct and precise control feel back to the pilot, providing exciting 3D performance and unthinkable flight speed.
CCPM direct servo linkage design removes the weight of a double push-pull linkage system, for fast reaction and precise control.
Integrated servo installs on the primary shaft bearing blocks allow the cyclic servos to be mounted straight to the bearing blocks, and when combined with the composite product frame plates, creates a tidy and uncluttered look.
The frame makes use of an integrated composite carbon product technique for ease of upkeep and high rigidness, while the increased front opening location allows for easy battery installation.
The innovative moving battery tray rails are imbedded into the 3K side frames, with a trademarked spring loaded locking mechanism permitting quick battery access along with battery protection.
A top mounted motor base brings the motor's center of gravity more detailed to the rotating disc, enhancing 3D agility and permitting blade drafts to effectively cool the motor.
The motor install system features a 3rd bearing block to provide improved motor shaft support, decreasing torque shift and minimizing the threat of striping a gear.
The drive train features a high spec MOD1 112T CNC helical primary equipment and a helical cut MOD1 tail drive equipment to enhance the equipment mesh and decrease equipment sound throughout flight.
A top mounted ESC platform utilizes the primary blade air flow for efficient ESC cooling.
The light-weight H-shaped electric device retention system provides protection, along with an ergonomically appropriate design to streamline operation.
The consisted of Align 750MX brushless motor features a ribbed case and fan to drastically increase cooling and enhance total power output.
The transmission features a structured design and allows easy disassembly.
The high quality tail transmission design, combined with a double point mounted tail pitch control assembly helps to decrease slop and boost rudder control.
The high torque rated one method bearing base, bearing supported double push point rudder control design, high speed rated tail blade grip thrust bearings and a 3rd bearing primary shaft support were consisted of to stand up to the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing mechanism to allow uncomplicated canopy installation.
3GX Features:
Upgraded 3GX represents the next generation of multi function flybarless systems. The drastically enhanced performance will create an instant influence on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the marketplace and features two ports to straight connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically showed instructions using the computer setup software directs the user through a step by step setup process, permitting quick setups without leaving out any steps.
With the soon to be launched Bluetooth connection set, the 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live adjustments to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, decreasing electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, permitting pilots to attain the most optimum setup for their helicopter without the guesswork.
Three levels of flight mode are readily available to provide the perfect feel for novice and advanced pilots.
Custom criteria have been developed to allow pilots to fine tune various swashplate and rudder settings and a settings export function allows customized settings to be shared amongst friends.
The 3GX features the highest spec gyroscope sensing units, permitting it to be used in the harshest conditions. The double axis plus rudder sensor drastically improves swashplate and rudder correction accuracy and will be felt when hovering, along with throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant qualities appear even when mounted with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, in addition to entirely re-written firmware. The outcome is a remarkable enhancement in stability that rivals a flybarred helicopter, while providing explosive agility.
With an integrated in pirouette payment function, the 3GX is able to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
Rudder control resembles the luxury GP-780 gyro because the rudder level of sensitivity is enhanced for the helicopter's rudder response qualities, permitting constant rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all ability levels to experience the perfect integration between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system makes use of a total of 10 sensing units, ensure positioning of the helicopter with superior precision and providing the ultimate option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 104T

Tail Own Equipment: 22T

Own Equipment Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V
Includes:
(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Total:
7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge