Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combination Helicopter Set. This amazing bundle includes not just the T-REX 700E DFC Set, however also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This set also includes an Align 530kV 750MX brushless motor, the 3GX flybarless system, 3 BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, along with a Castle Creations ICE2 HV 120 brushless ESC, supplying you with an extraordinary helicopter set and a similarly outstanding electronic devices bundle all in the same box.
700E DFC Features:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor go to effectively decrease wind resistance during flight and offer the most direct and exact control feel back to the pilot, supplying thrilling 3D performance and unimaginable flight speed.
CCPM direct servo linkage design gets rid of the weight of a double push-pull linkage system, for quick reaction and exact control.
Integrated servo installs on the primary shaft bearing obstructs permit the cyclic servos to be mounted straight to the bearing obstructs, when integrated with the composite product frame plates, produces a tidy and uncluttered look.
The frame makes use of an integrated composite carbon product method for ease of upkeep and high rigidness, while the increased front opening location allows for easy battery installation.
The innovative moving battery tray rails are imbedded into the 3K side frames, with a patented spring packed locking mechanism permitting fast battery gain access to along with battery protection.
A top mounted motor base brings the motor's center of gravity closer to the turning disc, improving 3D dexterity and enabling blade drafts to effectively cool the motor.
The motor mount system features a third bearing block to offer improved motor shaft support, decreasing torque shift and lessening the danger of striping a gear.
The drive train features a high spec MOD1 112T CNC helical primary gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and minimize gear sound during flight.
A top mounted ESC platform utilizes the primary blade airflow for effective ESC cooling.
The light-weight H-shaped electrical gadget retention system offers protection, along with an ergonomically appropriate design to simplify operation.
The included Align 750MX brushless motor features a ribbed case and fan to drastically increase cooling and enhance general power output.
The gear box features a streamlined design and allows easy disassembly.
The high quality tail gearbox design, integrated with a double point mounted tail pitch control assembly assists to minimize slop and increase rudder control.
The high torque rated one way bearing base, bearing supported double push point rudder control design, high speed rated tail blade grip thrust bearings and a third bearing primary shaft support were included to withstand the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing mechanism to permit effortless canopy setup.
3GX Characteristics:
Upgraded 3GX represents the next generation of multi function flybarless systems. The drastically enhanced performance will produce an instant effect on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and features 2 ports to straight link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions utilizing the computer system setup software directs the user through an action by action setup process, permitting fast setups without leaving out any steps.
With the soon to be released Bluetooth connectivity set, the 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, decreasing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to achieve the most optimum setup for their helicopter without the guesswork.
Three levels of flight mode are available to offer the perfect feel for beginner and advanced pilots.
Custom parameters have been established to permit pilots to tweak many swashplate and rudder settings and a settings export function allows custom settings to be shared among friends.
The 3GX features the highest spec gyroscope sensors, enabling it to be used in the harshest conditions. The double axis plus rudder sensor drastically enhances swashplate and rudder correction accuracy and will be felt when hovering, along with during aerobatic routines.
Suitable for 200 to 700 class helicopters, radiance engine or electrical powered.
The vibration resistant characteristics appear even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, in addition to totally re-written firmware. The outcome is a significant improvement in stability that equals a flybarred helicopter, while supplying explosive agility.
With an integrated in pirouette compensation function, the 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily performed with precision.
Rudder control is similar to the high-end GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder reaction characteristics, enabling consistent rudder feel even under high speed conditions. This excellent control feel will permit pilots of all ability levels to experience the perfect integration in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensors, make sure positioning of the helicopter with superior accuracy and supplying the ultimate service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V
Includes:
(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Total:
7-channel or more helicopter radio system
(2) 6S Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge