Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Set. This unbelievable package consists of not only the T-REX 700E DFC Set, but likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This set likewise consists of an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This extremely combo supplies you with an extraordinary helicopter set and a similarly impressive electronic devices and High Voltage package all in the exact same box.

700E DFC Functions:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor visit effectively minimize wind resistance during flight and provide the most direct and exact control feel back to the pilot, offering exciting 3D efficiency and unimaginable flight speed.
CCPM direct servo linkage style eliminates the weight of a double push-pull linkage system, for quick response and exact control.
Integrated servo mounts on the primary shaft bearing obstructs permit the cyclic servos to be mounted directly to the bearing obstructs, and when integrated with the composite material frame plates, creates a clean and uncluttered appearance.
The frame uses an integrated composite carbon material method for ease of maintenance and high rigidness, while the increased front opening location enables simple battery setup.
The innovative sliding battery tray rails are imbedded into the 3K side frames, with a patented spring loaded latching mechanism enabling quick battery gain access to along with battery security.
A leading mounted motor base brings the motor's center of mass better to the rotating disc, improving 3D dexterity and allowing blade drafts to effectively cool the motor.
The motor install system includes a 3rd bearing block to provide improved motor shaft assistance, minimizing torque shift and reducing the threat of striping an equipment.
The drive train includes a high spec MOD1 112T CNC helical primary equipment and a helical cut MOD1 tail drive equipment to enhance the equipment mesh and decrease equipment noise during flight.
A leading mounted ESC platform utilizes the primary blade airflow for efficient ESC cooling.
The light-weight H-shaped electric device retention system supplies security, along with an ergonomically appropriate style to simplify operation.
The included Align 750MX brushless motor includes a ribbed case and fan to drastically increase cooling and enhance total power output.
The gear box includes a streamlined style and allows simple disassembly.
The high quality tail gearbox style, integrated with a double point mounted tail pitch control assembly assists to decrease slop and boost rudder control.
The high torque ranked one method bearing base, bearing supported double push point rudder control style, high speed ranked tail blade grip thrust bearings and a 3rd bearing primary shaft assistance were included to endure the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing mechanism to permit simple and easy canopy setup. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 22T

Drive Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Includes:

(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Complete:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge