Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Set. This amazing package includes not only the T-REX 700E DFC Set, however also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit also includes an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This extremely combination supplies you with an amazing helicopter kit and an equally excellent electronics and High Voltage package all in the same box.

700E DFC Features:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor head to effectively decrease wind resistance throughout flight and supply the most direct and precise control feel back to the pilot, offering thrilling 3D performance and inconceivable flight speed.
CCPM direct servo linkage style gets rid of the weight of a double push-pull linkage system, for quick response and precise control.
Integrated servo installs on the main shaft bearing blocks enable the cyclic servos to be mounted directly to the bearing blocks, when integrated with the composite material frame plates, produces a clean and uncluttered appearance.
The frame utilizes an integrated composite carbon material strategy for ease of upkeep and high rigidness, while the increased front opening location permits basic battery installation.
The innovative moving battery tray rails are anchored into the 3K side frames, with a trademarked spring packed latching system permitting quick battery gain access to in addition to battery defense.
A top mounted motor base brings the motor's center of mass more detailed to the turning disc, enhancing 3D agility and permitting blade drafts to effectively cool the motor.
The motor mount system includes a 3rd bearing block to supply better motor shaft assistance, decreasing torque shift and reducing the threat of striping an equipment.
The drive train includes a high specification MOD1 112T CNC helical main gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and decrease gear sound throughout flight.
A top mounted ESC platform uses the main blade airflow for effective ESC cooling.
The lightweight H-shaped electric gadget retention system supplies defense, in addition to an ergonomically appropriate style to simplify operation.
The included Align 750MX brushless motor includes a ribbed case and fan to dramatically increase cooling and enhance total power output.
The gear box includes a structured style and enables basic disassembly.
The high quality tail transmission style, integrated with a dual point mounted tail pitch control assembly assists to decrease slop and increase rudder control.
The high torque rated one method bearing base, bearing supported double push point rudder control style, high speed rated tail blade grip thrust bearings and a 3rd bearing main shaft assistance were included to withstand the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration mounting system to enable uncomplicated canopy installation. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Consists of:

(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needed to Total:

7-channel or more helicopter radio system
(2) 6S Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge