Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Package. This amazing package includes not just the T-REX 700E DFC Package, but likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This package likewise includes an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, three DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This super combo provides you with an amazing helicopter package and a similarly impressive electronics and High Voltage package all in the exact same box.

700E DFC Functions:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor go to efficiently lower wind resistance throughout flight and offer the most direct and accurate control feel back to the pilot, supplying thrilling 3D performance and unimaginable flight speed.
CCPM direct servo linkage style gets rid of the weight of a double push-pull linkage system, for quick reaction and accurate control.
Integrated servo installs on the main shaft bearing obstructs allow the cyclic servos to be mounted straight to the bearing obstructs, and when combined with the composite material frame plates, creates a tidy and uncluttered look.
The frame utilizes an integrated composite carbon material strategy for ease of maintenance and high rigidity, while the increased front opening location enables easy battery setup.
The innovative sliding battery tray rails are inserted into the 3K side frames, with a patented spring packed latching system allowing for quick battery gain access to in addition to battery protection.
A leading mounted motor base brings the motor's center of mass more detailed to the rotating disc, improving 3D dexterity and permitting blade drafts to efficiently cool the motor.
The motor install system includes a third bearing block to offer better motor shaft support, reducing torque shift and decreasing the risk of striping a gear.
The drive train includes a high specification MOD1 112T CNC helical main equipment and a helical cut MOD1 tail drive equipment to improve the equipment mesh and reduce equipment noise throughout flight.
A leading mounted ESC platform uses the main blade air flow for effective ESC cooling.
The light-weight H-shaped electrical gadget retention system provides protection, in addition to an ergonomically right style to simplify operation.
The included Align 750MX brushless motor includes a ribbed case and fan to considerably increase cooling and improve general power output.
The gear box includes a structured style and permits easy disassembly.
The high quality tail gearbox style, combined with a dual point mounted tail pitch control assembly assists to reduce slop and boost rudder control.
The high torque ranked one way bearing base, bearing supported dual push point rudder control style, high speed ranked tail blade grip thrust bearings and a third bearing main shaft support were included to hold up against the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration installing system to allow simple and easy canopy setup. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Includes:

(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Total:

7-channel or more helicopter radio system
(2) 6S Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge