Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Package. This extraordinary package consists of not only the T-REX 700E DFC Package, but likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit likewise consists of an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This super combination provides you with an extraordinary helicopter kit and a similarly outstanding electronic devices and High Voltage package all in the same box.

700E DFC Features:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor visit efficiently lower wind resistance during flight and provide the most direct and accurate control feel back to the pilot, offering thrilling 3D performance and unthinkable flight speed.
CCPM direct servo linkage style eliminates the weight of a double push-pull linkage system, for fast reaction and accurate control.
Integrated servo installs on the primary shaft bearing blocks enable the cyclic servos to be installed straight to the bearing blocks, when integrated with the composite material frame plates, creates a tidy and uncluttered look.
The frame makes use of an integrated composite carbon material method for ease of maintenance and high rigidness, while the increased front opening area enables simple battery installation.
The ingenious moving battery tray rails are inserted into the 3K side frames, with a trademarked spring filled latching system permitting quick battery gain access to in addition to battery defense.
A leading installed motor base brings the motor's center of mass closer to the turning disc, improving 3D dexterity and permitting blade drafts to efficiently cool the motor.
The motor install system includes a 3rd bearing block to provide better motor shaft support, lowering torque shift and reducing the threat of striping a gear.
The drive train includes a high spec MOD1 112T CNC helical primary gear and a helical cut MOD1 tail drive gear to improve the gear mesh and lessen gear noise during flight.
A leading installed ESC platform utilizes the primary blade air flow for reliable ESC cooling.
The light-weight H-shaped electric gadget retention system provides defense, in addition to an ergonomically proper style to simplify operation.
The included Align 750MX brushless motor includes a ribbed case and fan to drastically increase cooling and improve overall power output.
The gear box includes a structured style and enables simple disassembly.
The high quality tail gearbox style, integrated with a double point installed tail pitch control assembly assists to lessen slop and boost rudder control.
The high torque rated one way bearing base, bearing supported double push point rudder control style, high speed rated tail blade grip thrust bearings and a 3rd bearing primary shaft support were included to hold up against the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing system to enable effortless canopy installation. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 104T

Tail Own Equipment: 22T

Own Equipment Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Includes:

(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needed to Complete:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge