Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Package. This extraordinary bundle includes not only the T-REX 700E DFC Package, however also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This package also includes an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, three DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This very combination provides you with an incredible helicopter package and a similarly excellent electronics and High Voltage bundle all in the same box.

700E DFC Functions:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor visit efficiently lower wind resistance throughout flight and provide the most direct and precise control feel back to the pilot, providing exciting 3D performance and unthinkable flight speed.
CCPM direct servo linkage design gets rid of the weight of a double push-pull linkage system, for fast response and precise control.
Integrated servo mounts on the primary shaft bearing blocks enable the cyclic servos to be installed straight to the bearing blocks, when combined with the composite product frame plates, produces a tidy and uncluttered appearance.
The frame uses an integrated composite carbon product method for ease of maintenance and high rigidity, while the increased front opening location permits easy battery installation.
The ingenious moving battery tray rails are inserted into the 3K side frames, with a trademarked spring packed latching system allowing for quick battery gain access to in addition to battery protection.
A top installed motor base brings the motor's center of mass better to the turning disc, enhancing 3D agility and enabling blade drafts to efficiently cool the motor.
The motor mount system includes a 3rd bearing block to provide enhanced motor shaft support, decreasing torque shift and lessening the danger of striping a gear.
The drive train includes a high spec MOD1 112T CNC helical primary gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and lessen gear noise throughout flight.
A top installed ESC platform utilizes the primary blade airflow for effective ESC cooling.
The light-weight H-shaped electrical gadget retention system provides protection, in addition to an ergonomically correct design to simplify operation.
The consisted of Align 750MX brushless motor includes a ribbed case and fan to drastically increase cooling and enhance total power output.
The gear box includes a structured design and allows easy disassembly.
The high quality tail gearbox design, combined with a dual point installed tail pitch control assembly helps to lessen slop and increase rudder control.
The high torque rated one way bearing base, bearing supported dual push point rudder control design, high speed rated tail blade grip thrust bearings and a 3rd bearing primary shaft support were consisted of to stand up to the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration mounting system to enable uncomplicated canopy installation. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Includes:

(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needed to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge