Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Set. This amazing plan includes not only the T-REX 600N DFC Set, however also a set of 600 3G Carbon Fiber blades, a guv sensing unit, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This super combo set supplies you with an unbelievable helicopter set and a similarly impressive electronic devices plan all in the same box.

T-REX 600N DFC Features: Equipped with the DFC flybarless head assembly, with incredibly low CG style to decrease wind resistance, offering a more direct and precise flight control reaction and greater top speed.
Double 3K carbon plate side frame style for ease of maintenance and resistance to torque caused flex.
Extra radial bearing is added to the top of the primary gear center to ensure steady rotation, and eliminate jamming of one method bearing.
Revamped stainless steel tail drive gear center install, for more precise tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal ports, leading to enhanced rudder control precision.
Revamped torque tube front and rear drive gear set, utilizes highest spec and superior anti-wear material to increase the general strength and toughness. Effectively decrease gear striping and crash damage.
High quality tail transmission style, combined with dual point mounted tail pitch control assembly to decrease slop and increase rudder control precision.
Utilizes high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High performance tail shaft drive style.
Highly effective lightened engine cooling fan, reducing engine load and improving cooling performance.
Large size clutch system with distinct installation technique for excellent balance, minimal vibration, and efficient power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking capability.
Unique H shaped random sample installing platform for simple electronic installing and protection.
Large capacity 440CC fuel tank for up to 10 minutes of extreme 3D flights.
Starting and clutch support point utilizes 10mm one method bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of set up and elimination.
Created with ideas from big helicopter competitions, for the best fixed and vibrant flight performance.

3GX Characteristics:

Revamped 3GX represents the next generation of multi function flybarless systems. The considerably enhanced performance will develop an immediate impact on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and features 2 ports to straight connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup simply in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated guidelines using the computer system setup software application directs the user through an action by action setup procedure, allowing for quick setups without leaving out any steps.
With the soon to be launched Bluetooth connectivity set, the 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, allowing pilots to accomplish the most ideal setup for their helicopter without the guesswork.
3 levels of flight mode are readily available to provide the ideal feel for novice and advanced pilots.
Custom specifications have actually been developed to enable pilots to fine tune various swashplate and rudder settings and a settings export function allows custom settings to be shared among friends.
The 3GX features the highest spec gyroscope sensing units, allowing it to be used in the harshest conditions. The dual axis plus rudder sensing unit considerably enhances swashplate and rudder correction precision and will be felt when hovering, in addition to during aerobatic routines.
Ideal for 200 to 800 class helicopters, glow engine or electric powered.
The vibration resistant qualities are evident even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with totally re-written firmware. The outcome is a remarkable improvement in stability that equals a flybarred helicopter, while offering explosive agility.
With a built in pirouette compensation function, the 3GX is able to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily carried out with precision.
Rudder control is similar to the high-end GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder reaction qualities, allowing consistent rudder feel even under high speed conditions. This exceptional control feel will enable pilots of all ability levels to experience the ideal combination between the 3GX and the helicopter.
Extra peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system utilizes a total of 10 sensing units making sure positioning of the helicopter with superior accuracy and offering the ultimate solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Own Gear: 180T

Own Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Governor Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel