Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Kit. This incredible plan includes not only the T-REX 600N DFC Kit, but also a pair of 600 3G Carbon Fiber blades, a governor sensing unit, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and of course the 3GX flybarless system. This super combo kit provides you with an incredible helicopter kit and an equally impressive electronics plan all in the exact same box.

T-REX 600N DFC Functions: Geared up with the DFC flybarless head assembly, with incredibly low CG style to reduce wind resistance, supplying a more direct and accurate flight control action and greater leading speed.
Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary equipment hub to make sure stable rotation, and remove jamming of one way bearing.
Revamped stainless-steel tail drive equipment center install, for more accurate tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal connectors, resulting in enhanced rudder control precision.
Revamped torque tube front and rear drive equipment set, makes use of greatest spec and superior anti-wear product to increase the overall strength and toughness. Successfully reduce equipment striping and crash damage.
High quality tail gearbox style, combined with dual point mounted tail pitch control assembly to reduce slop and increase rudder control precision.
Utilizes high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High efficiency tail shaft drive style.
Extremely effective lightened engine cooling fan, reducing engine load and improving cooling efficiency.
Large size clutch system with unique installation method for good balance, minimal vibration, and effective power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder action and excellent tail locking capability.
Special H shaped random sample mounting platform for simple electronic mounting and defense.
Large capability 440CC fuel tank for as much as 10 minutes of severe 3D flights.
Starting and clutch assistance point makes use of 10mm one way bearing.
All set to fly dry weight is only 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization impact.
Effect resistant fiberglass canopy with 3 point hook mounting system for ease of set up and elimination.
Designed with ideas from big helicopter competitors, for the best static and vibrant flight efficiency.

3GX Characteristics:

Revamped 3GX represents the next generation of multi function flybarless systems. The considerably enhanced efficiency will produce an instant impact on any enthusiasts.
The 3GX is presently the tiniest and lightest flybarless system on the marketplace and includes two ports to straight connect Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically detailed instructions using the computer setup software directs the user through an action by action setup process, permitting quick setups without leaving out any steps.
With the quickly to be launched Bluetooth connectivity kit, the 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to achieve the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to provide the ideal feel for newbie and advanced pilots.
Custom-made criteria have actually been developed to permit pilots to fine tune many swashplate and rudder settings and a settings export feature enables customized settings to be shared among good friends.
The 3GX includes the greatest spec gyroscope sensors, enabling it to be utilized in the harshest conditions. The dual axis plus rudder sensing unit considerably improves swashplate and rudder correction precision and will be felt when hovering, along with throughout aerobatic routines.
Appropriate for 200 to 800 class helicopters, radiance engine or electric powered.
The vibration resistant attributes appear even when mounted with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to totally re-written firmware. The result is a significant enhancement in stability that matches a flybarred helicopter, while supplying explosive agility.
With a built in pirouette payment function, the 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with precision.
Rudder control resembles the luxury GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder action attributes, enabling consistent rudder feel even under high speed conditions. This excellent control feel will permit pilots of all skill levels to experience the ideal combination between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system makes use of an overall of 10 sensors guaranteeing positioning of the helicopter with superior precision and supplying the ultimate option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support as much as 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Own Gear: 180T

Own Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Governor Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel