Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Set. This amazing package includes not only the T-REX 600N DFC Set, however also a pair of 600 3G Carbon Fiber blades, a guv sensor, a 2-1 voltage regulator, 3 DS615 standard servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This incredibly combination set supplies you with an amazing helicopter set and a similarly outstanding electronics package all in the same box.

T-REX 600N DFC Functions: Geared up with the DFC flybarless head assembly, with extremely low CG style to decrease wind resistance, offering a more direct and precise flight control reaction and higher top speed.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque induced flex.
Extra radial bearing is added to the top of the primary gear hub to make sure stable rotation, and eliminate jamming of one way bearing.
Redesigned stainless-steel tail drive gear center mount, for more precise tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal connectors, resulting in enhanced rudder control accuracy.
Redesigned torque tube front and rear drive gear set, uses greatest spec and remarkable anti-wear material to increase the total strength and sturdiness. Effectively decrease gear striping and crash damage.
High quality tail transmission style, integrated with double point installed tail pitch control assembly to decrease slop and boost rudder control accuracy.
Utilizes high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High performance tail shaft drive style.
Extremely effective lightened engine cooling fan, reducing engine load and enhancing cooling performance.
Large diameter clutch system with special setup approach for excellent balance, minimal vibration, and reliable power transfer.
Forward installed rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder reaction and excellent tail locking capability.
Unique H shaped cross section installing platform for easy electronic installing and protection.
Large capability 440CC fuel tank for as much as 10 minutes of extreme 3D flights.
Starting and clutch support point uses 10mm one way bearing.
All set to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization impact.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install and removal.
Created with principles from large helicopter competitors, for the very best static and dynamic flight performance.

3GX Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The significantly enhanced performance will develop an immediate effect on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and features two ports to straight link Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup simply in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically detailed guidelines utilizing the computer system setup software application directs the user through a step by action setup process, enabling quick setups without leaving out any actions.
With the soon to be released Bluetooth connection set, the 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps permitting live changes to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, permitting pilots to attain the most ideal setup for their helicopter without the uncertainty.
3 levels of flight mode are readily available to supply the best feel for novice and advanced pilots.
Custom parameters have actually been developed to enable pilots to fine tune many swashplate and rudder settings and a settings export feature allows custom settings to be shared amongst good friends.
The 3GX features the greatest spec gyroscope sensing units, permitting it to be used in the harshest conditions. The double axis plus rudder sensor significantly improves swashplate and rudder correction accuracy and will be felt when hovering, in addition to throughout aerobatic routines.
Appropriate for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant characteristics are evident even when installed with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with totally re-written firmware. The result is a remarkable enhancement in stability that equals a flybarred helicopter, while offering explosive dexterity.
With an integrated in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily performed with accuracy.
Rudder control resembles the high-end GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder reaction characteristics, permitting constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all ability levels to experience the best combination in between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system uses a total of 10 sensing units ensuring positioning of the helicopter with remarkable precision and offering the supreme service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support as much as 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Own Gear: 180T

Own Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Guv Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Line up 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel