Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Package. This incredible package consists of not just the T-REX 600N DFC Package, but likewise a pair of 600 3G Carbon Fiber blades, a governor sensor, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and of course the 3GX flybarless system. This extremely combination kit offers you with an unbelievable helicopter kit and an equally outstanding electronics package all in the exact same box.

T-REX 600N DFC Functions: Equipped with the DFC flybarless head assembly, with incredibly low CG design to lessen wind resistance, offering a more direct and exact flight control reaction and greater leading speed.
Double 3K carbon plate side frame design for ease of upkeep and resistance to torque induced flex.
Additional radial bearing is added to the top of the main gear center to ensure stable rotation, and get rid of jamming of one way bearing.
Revamped stainless-steel tail drive gear center install, for more exact tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal ports, leading to improved rudder control precision.
Revamped torque tube front and rear drive gear set, utilizes greatest specification and exceptional anti-wear material to increase the overall strength and sturdiness. Efficiently lessen gear striping and crash damage.
High quality tail transmission design, integrated with dual point mounted tail pitch control assembly to lessen slop and boost rudder control precision.
Utilizes high efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
High efficiency tail shaft drive design.
Highly efficient lightened engine cooling fan, minimizing engine load and improving cooling efficiency.
Large diameter clutch system with distinct setup technique for great balance, minimal vibration, and efficient power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder reaction and excellent tail locking ability.
Special H formed random sample installing platform for simple electronic installing and security.
Large capacity 440CC fuel tank for approximately 10 minutes of severe 3D flights.
Starting and clutch assistance point utilizes 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of set up and removal.
Developed with concepts from big helicopter competitions, for the very best static and vibrant flight performance.

3GX Features:

Revamped 3GX represents the next generation of multi function flybarless systems. The considerably improved performance will produce an instant influence on any enthusiasts.
The 3GX is currently the tiniest and lightest flybarless system on the market and includes 2 ports to directly connect Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed instructions utilizing the computer system setup software application directs the user through an action by action setup process, allowing for quick setups without omitting any steps.
With the quickly to be launched Bluetooth connection kit, the 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps permitting live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, minimizing electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, permitting pilots to attain the most optimum setup for their helicopter without the uncertainty.
Three levels of flight mode are offered to supply the ideal feel for beginner and advanced pilots.
Customized criteria have been developed to enable pilots to fine tune many swashplate and rudder settings and a settings export feature allows customized settings to be shared amongst pals.
The 3GX includes the greatest spec gyroscope sensing units, permitting it to be used in the harshest conditions. The dual axis plus rudder sensor considerably improves swashplate and rudder correction precision and will be felt when hovering, in addition to throughout aerobatic routines.
Appropriate for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant attributes are evident even when mounted with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with completely re-written firmware. The result is a dramatic enhancement in stability that equals a flybarred helicopter, while offering explosive agility.
With a built in pirouette compensation function, the 3GX is able to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with precision.
Rudder control is similar to the luxury GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder reaction attributes, permitting constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all skill levels to experience the ideal integration in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system utilizes an overall of 10 sensing units making sure positioning of the helicopter with exceptional accuracy and offering the supreme solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Drive Gear: 180T

Drive Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Package
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Governor Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Had to Complete: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Line up 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel