Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Kit. This incredible package includes not only the T-REX 600N DFC Kit, but also a pair of 600 3G Carbon Fiber blades, a governor sensing unit, a 2-1 voltage regulator, three DS615 basic servos, one DS655 specialized servo, and naturally the 3GX flybarless system. This extremely combination set offers you with an unbelievable helicopter set and a similarly remarkable electronic devices package all in the very same box.

T-REX 600N DFC Features: Equipped with the DFC flybarless head assembly, with extremely low CG style to reduce wind resistance, offering a more direct and exact flight control action and higher top speed.
Double 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is added to the top of the main gear center to ensure steady rotation, and eliminate jamming of one way bearing.
Redesigned stainless-steel tail drive gear center install, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal adapters, resulting in enhanced rudder control precision.
Redesigned torque tube front and rear drive gear set, uses highest spec and superior anti-wear material to increase the total strength and durability. Efficiently reduce gear striping and crash damage.
High quality tail gearbox style, combined with double point mounted tail pitch control assembly to reduce slop and increase rudder control precision.
Uses high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High effectiveness tail shaft drive style.
Highly effective lightened engine cooling fan, lowering engine load and improving cooling effectiveness.
Large diameter clutch system with unique setup approach for excellent balance, minimal vibration, and efficient power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder action and excellent tail locking capability.
Special H formed cross section installing platform for easy electronic installing and protection.
Large capability 440CC fuel tank for up to 10 minutes of severe 3D flights.
Starting and clutch assistance point uses 10mm one way bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization impact.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of set up and removal.
Developed with concepts from large helicopter competitions, for the best static and dynamic flight performance.

3GX Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The drastically enhanced performance will create an instant impact on any lovers.
The 3GX is currently the tiniest and lightest flybarless system on the marketplace and includes 2 ports to directly link Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically detailed guidelines utilizing the computer setup software application directs the user through an action by action setup process, allowing for fast setups without leaving out any actions.
With the soon to be released Bluetooth connection set, the 3GX can be set wirelessly from a PC. Ultimately there will also be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, lowering electronic mess and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to attain the most ideal setup for their helicopter without the uncertainty.
Three levels of flight mode are available to offer the perfect feel for novice and advanced pilots.
Customized criteria have been developed to enable pilots to fine tune many swashplate and rudder settings and a settings export function enables custom-made settings to be shared among good friends.
The 3GX includes the highest spec gyroscope sensors, enabling it to be used in the harshest conditions. The double axis plus rudder sensing unit drastically enhances swashplate and rudder correction precision and will be felt when hovering, along with throughout aerobatic routines.
Suitable for 200 to 800 class helicopters, radiance engine or electric powered.
The vibration resistant qualities are evident even when mounted with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with completely re-written firmware. The result is a significant enhancement in stability that equals a flybarred helicopter, while offering explosive agility.
With a built in pirouette compensation function, the 3GX is able to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with precision.
Rudder control is similar to the high-end GP-780 gyro because the rudder level of sensitivity is enhanced for the helicopter's rudder action qualities, enabling consistent rudder feel even under high speed conditions. This excellent control feel will enable pilots of all skill levels to experience the perfect combination between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system uses an overall of 10 sensors making sure positioning of the helicopter with superior accuracy and offering the ultimate service for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Own Equipment: 180T

Own Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Governor Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel