Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Kit. This extraordinary plan includes not just the T-REX 600N DFC Kit, but also a set of 600 3G Carbon Fiber blades, a guv sensing unit, a 2-1 voltage regulator, 3 DS615 standard servos, one DS655 specialized servo, and of course the 3GX flybarless system. This extremely combo package supplies you with an amazing helicopter package and an equally outstanding electronics plan all in the very same box.

T-REX 600N DFC Features: Geared up with the DFC flybarless head assembly, with exceptionally low CG style to lessen wind resistance, offering a more direct and accurate flight control action and greater leading speed.
Double 3K carbon plate side frame style for ease of maintenance and resistance to torque induced flex.
Extra radial bearing is contributed to the top of the main gear hub to guarantee stable rotation, and remove jamming of one way bearing.
Revamped stainless steel tail drive gear center mount, for more accurate tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal adapters, leading to enhanced rudder control accuracy.
Revamped torque tube front and rear drive gear set, uses highest spec and superior anti-wear product to increase the overall strength and sturdiness. Successfully lessen gear striping and crash damage.
High quality tail transmission style, integrated with double point installed tail pitch control assembly to lessen slop and boost rudder control accuracy.
Makes use of high effective tail drive system.
High speed ranked thrust bearing in tail blade grips.
High performance tail shaft drive style.
Extremely effective lightened engine cooling fan, reducing engine load and improving cooling performance.
Big diameter clutch system with special installation approach for great balance, very little vibration, and efficient power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder action and outstanding tail locking capability.
Unique H shaped sample installing platform for simple electronic installing and protection.
Big capability 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
Starting and clutch support point uses 10mm one way bearing.
Prepared to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization effect.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install and removal.
Designed with concepts from big helicopter competitions, for the very best static and dynamic flight efficiency.

3GX Characteristics:

Revamped 3GX represents the next generation of multi function flybarless systems. The considerably enhanced efficiency will develop an immediate effect on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the marketplace and features two ports to straight connect Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system presently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions utilizing the computer setup software directs the user through an action by step setup process, enabling fast setups without leaving out any steps.
With the soon to be released Bluetooth connectivity package, the 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live modifications to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, allowing pilots to achieve the most ideal setup for their helicopter without the uncertainty.
Three levels of flight mode are available to provide the perfect feel for newbie and advanced pilots.
Custom specifications have been established to allow pilots to tweak many swashplate and rudder settings and a settings export function enables custom-made settings to be shared among buddies.
The 3GX features the highest spec gyroscope sensors, allowing it to be used in the harshest conditions. The double axis plus rudder sensing unit considerably enhances swashplate and rudder correction accuracy and will be felt when hovering, along with throughout aerobatic regimens.
Ideal for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant characteristics appear even when installed with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, along with entirely re-written firmware. The outcome is a remarkable enhancement in stability that matches a flybarred helicopter, while offering explosive agility.
With a built in pirouette settlement function, the 3GX is able to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with accuracy.
Rudder control resembles the high-end GP-780 gyro in that the rudder level of sensitivity is optimized for the helicopter's rudder action characteristics, allowing constant rudder feel even under high speed conditions. This outstanding control feel will allow pilots of all skill levels to experience the perfect combination in between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system uses a total of 10 sensors ensuring positioning of the helicopter with superior accuracy and offering the ultimate solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Own Gear: 180T

Own Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Guv Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Needed To Total: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Line up 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel