Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Package. This incredible plan includes not only the T-REX 600N DFC Package, but likewise a set of 600 3G Carbon Fiber blades, a guv sensor, a 2-1 voltage regulator, 3 DS615 basic servos, one DS655 specialized servo, and of course the 3GX flybarless system. This extremely combo set provides you with an extraordinary helicopter set and an equally outstanding electronics plan all in the exact same box.

T-REX 600N DFC Features: Geared up with the DFC flybarless head assembly, with incredibly low CG design to reduce wind resistance, providing a more direct and accurate flight control response and greater leading speed.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is added to the top of the main equipment hub to guarantee steady rotation, and get rid of jamming of one way bearing.
Upgraded stainless steel tail drive equipment center mount, for more accurate tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal adapters, resulting in improved rudder control accuracy.
Upgraded torque tube front and rear drive equipment set, utilizes greatest spec and exceptional anti-wear product to increase the overall strength and durability. Efficiently reduce equipment striping and crash damage.
High quality tail gearbox design, combined with dual point installed tail pitch control assembly to reduce slop and boost rudder control accuracy.
Uses high efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
High effectiveness tail shaft drive design.
Highly efficient lightened engine cooling fan, lowering engine load and improving cooling effectiveness.
Big diameter clutch system with distinct installation technique for great balance, very little vibration, and efficient power transfer.
Forward installed rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder response and exceptional tail locking ability.
Unique H shaped cross section mounting platform for easy electronic mounting and security.
Big capacity 440CC fuel tank for approximately 10 minutes of severe 3D flights.
Starting and clutch support point utilizes 10mm one way bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Effect resistant fiberglass canopy with 3 point hook mounting system for ease of install and removal.
Designed with concepts from large helicopter competitions, for the best fixed and dynamic flight efficiency.

3GX Characteristics:

Upgraded 3GX represents the next generation of multi function flybarless systems. The considerably improved efficiency will produce an instant effect on any lovers.
The 3GX is currently the smallest and lightest flybarless system on the market and includes 2 ports to directly link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions utilizing the computer system setup software application directs the user through an action by step setup procedure, allowing for fast setups without omitting any steps.
With the soon to be launched Bluetooth connection set, the 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps permitting live adjustments to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is required, lowering electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, permitting pilots to attain the most optimal setup for their helicopter without the guesswork.
3 levels of flight mode are offered to offer the perfect feel for novice and advanced pilots.
Custom-made parameters have been developed to allow pilots to tweak numerous swashplate and rudder settings and a settings export function permits custom-made settings to be shared amongst pals.
The 3GX includes the greatest spec gyroscope sensing units, permitting it to be utilized in the harshest conditions. The dual axis plus rudder sensor considerably enhances swashplate and rudder correction accuracy and will be felt when hovering, along with throughout aerobatic regimens.
Suitable for 200 to 800 class helicopters, glow engine or electric powered.
The vibration resistant qualities appear even when installed with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to completely re-written firmware. The outcome is a remarkable enhancement in stability that equals a flybarred helicopter, while providing explosive agility.
With an integrated in pirouette payment function, the 3GX is able to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with accuracy.
Rudder control is similar to the high end GP-780 gyro in that the rudder level of sensitivity is enhanced for the helicopter's rudder response qualities, permitting constant rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all skill levels to experience the perfect integration in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system utilizes an overall of 10 sensing units making sure positioning of the helicopter with exceptional precision and providing the ultimate option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Package
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Governor Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Had to Complete: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel