Align T-Rex 600E Pro Super Combo

Line up 600E Pro Super Combo Features:

• Brand new all metal high precision and high rigidness main blade assembly, providing 3 positive/negative deltas and numerous Bell & Hiller mixing ratios. The head can be tuned for exceptional stability suitable in F3C competition, or lightening quick dexterity for 3D aerobatic exhibition.
• The frame uses 2mm carbon fiber plates of the highest specification. Patented composite material building strategy skillfully utilize frame area that enhanced overall rigidness, and also produced a minimalistic beauty.
• Innovative moving battery tray rails anchored into the 3K side frames, with trademarked spring packed latching mechanism, permitting quick battery gain access to as well as battery protection.
• Heatsink embedded into motor install for efficient cooling of motor.
• Top installed motor base bringing the motor's center of mass more detailed to rotating disc, enhancing 3D agility.
• Utilize direct link CCPM swashplate control system to make it possible for direct and quick control action. Specially designed anodized CNC servo horns are not only aesthetically pleasing, however are very rigid.
• Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and least expensive noise.
• The most optimal motor pinion ratio and tail gear ratio to accomplish the most effective power output and flight characteristic.
• High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder lockingand control effectiveness.
• Additional radial bearing is contributed to the one way bearing block to guarantee smooth rotation, and get rid of jammed one way bearing.
• Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower typical current to lengthen the life of batteries
• Motor install includes third bearing block to offer motor shaft assistance, efficiently minimize torque caused shifts, and lessen gear striping issue.
• Ergonomically designed H-shaped electronic install to offer versatile organization or equipment, and lessen wire clutter.
• Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidness. The more streamlined design also allows for simpler disassembly.
• Total pitch variety of +15~-15 degrees, for the ultimate 3D explosive power.
• Tail pitch mechanism geared up with high precision bearing.
• High speed thrust bearings in tail blade grips.
• New lightened landing gear assembly with lower center of gravity.
• High quality painted fiberglass canopy with 4-point quick release mounts.

Note: Users must have a particular principle of security to operate the R/C helicopters. Make certain to check out and abide by related security notes of user's manual prior to flying.

This bundle consists of:
(1) T-REX 600E PRO Kit
(1) Aluminum Tail Boom
(1) 600 3G Carbon fiber blades
(1) 600MX Brushless Motor (510KV)
(3) DS610 Digital servo
(1) DS650 Digital servo
(1) Castle ICE HV 80 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
(2) 6S Li-Po 2600 ~ 5200mAh (3300mAh recommended)
Dial Pitch Gauge

Specs:

Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Drive Equipment: 13T
Main Drive Equipment: 112T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.61:3.85
Weight (w/Motor): 2350g