Align T-Rex 600E Pro Super Combo

Align 600E Pro Super Combination Features:

• Brand name new all metal high accuracy and high rigidity main blade assembly, offering 3 positive/negative deltas and various Bell & Hiller mixing ratios. The head can be tuned for exceptional stability ideal in F3C competition, or lightening quick agility for 3D aerobatic exhibition.
• The frame uses 2mm carbon fiber plates of the greatest specification. Trademarked composite material construction technique cleverly make use of frame area that improved total rigidity, and also developed a minimalistic beauty.
• Innovative moving battery tray rails anchored into the 3K side frames, with trademarked spring filled latching mechanism, permitting quick battery gain access to in addition to battery protection.
• Heatsink embedded into motor mount for reliable cooling of motor.
• Top installed motor base bringing the motor's center of mass more detailed to rotating disc, enhancing 3D agility.
• Utilize direct link CCPM swashplate control system to allow direct and quick control reaction. Specially designed anodized CNC servo horns are not just aesthetically pleasing, but are extremely rigid.
• Utilizes greatest spec CNC modue-1 helical main equipment, with greatest load tolerance and lowest noise.
• The most optimum motor pinion ratio and tail equipment ratio to accomplish the most effective power output and flight characteristic.
• High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder lockingand control effectiveness.
• Additional radial bearing is contributed to the one method bearing block to guarantee smooth rotation, and remove jammed one method bearing.
• Brand new 600 class 12S high voltage brushless motor offering generous torque and power output, yet consumes lower typical current to prolong the life of batteries
• Motor mount includes 3rd bearing block to provide motor shaft support, effectively reduce torque induced shifts, and decrease equipment striping issue.
• Ergonomically designed H-shaped electronic mount to provide flexible organization or devices, and decrease wire clutter.
• Brand new CNC machined metal tail transmission, with thicker side plates to increase rigidity. The more streamlined style likewise allows for simpler disassembly.
• Total pitch series of +15~-15 degrees, for the ultimate 3D explosive power.
• Tail pitch mechanism equipped with high accuracy bearing.
• High speed thrust bearings in tail blade grips.
• New lightened landing equipment assembly with lower center of gravity.
• High quality painted fiberglass canopy with 4-point quick release mounts.

Note: Users should have a specific principle of security to run the R/C helicopters. Be sure to check out and abide by associated security notes of instruction manual prior to flying.

This plan includes:
(1) T-REX 600E PRO Set
(1) Aluminum Tail Boom
(1) 600 3G Carbon fiber blades
(1) 600MX Brushless Motor (510KV)
(3) DS610 Digital servo
(1) DS650 Digital servo
(1) Castle ICE HV 80 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needs:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
(2) 6S Li-Po 2600 ~ 5200mAh (3300mAh suggested)
Dial Pitch Gauge

Specs:

Length: 1160mm
Height: 353mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Drive Gear: 13T
Main Drive Gear: 112T
Autorotation Tail Own Gear: 131T
Tail Own Gear: 34T
Own Gear Ratio: 1:8.61:3.85
Weight (w/Motor): 2350g