Align T-REX 600E PRO DFC Super Combo(GPro)

Introducing:
The brand name new T-Rex 600E PRO DFC is the result of ingenious engineering influenced by the art of contemporary industrial design. Matched with Gpro flybarless system, the new generation T-Rex 600E PRO DFC is a program of excellence..
Geared up with the low CG DFC rotor head, successfully lower wind resistance during flight, offering the most direct and accurate control feel back to the pilot; greatest spec 2mm thick carbon fiber plate with patented plastic combination strategies not just reinforce the structure, but also create a cool and tidy appearance; Distinct battery latch assembly for stronger mount and much easier battery replacement.
A power upgrade system created specifically to bump up the power output of T-Rex 600E Pro by 30% by updating the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with significant increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight period. In addition, the brand name new spindle shaft design includes bigger diameter from 6mm to 8mm, with large M5x10mm spindle screws to increase the rigidness of the total rotor head.
The astounding flying performance and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop among all competitors!

Standard devices:
Gpro Flybarless System X 1 set
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Requirements:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Size: 1347mm
Tail Rotor Size: 260mm
Motor Pinion Equipment: 14T
Main Drive Equipment: 118T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Devices:
T-REX 600E DFC Packages Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down
Gpro Flybarless System x 1set Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Includes :
ALIGN new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The freshly new software application structure enhances system settlement, bring GPro up with accurate and nimble action, and also keep up-to-date flying performance than ever.The crucial is that makes use of with most current iOS and Android APP can be easily and straight adjusted through mobile phone while at the field. New human oriented user interface permits practical and rapid setup and installation.

Brand new CPU, processing 20 times faster than previous generation, bring GPro up with accurate and nimble response.
Freshly new software application procedure structure enhances system settlement and keep up-to-date flying performance.
Utilizes with most current iOS and Android APP that GPro can be easily and straight adjusted through mobile phone while flying outdoors.
New human oriented user interface permits practical and rapid setup and installation.
Superior flying characteristic remain the same flying control among T-REX 250~800 helicopters.
Full support receivers and satellites currently on the marketplace, consisting of S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Operating voltage variety:DC 3.5V~8.4V
Operating current consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup