Align T-REX 600E PRO DFC Super Combo(GPro)

Introducing:
The brand name brand-new T-Rex 600E PRO DFC is the result of ingenious engineering motivated by the art of modern industrial design. Matched with Gpro flybarless system, the brand-new generation T-Rex 600E PRO DFC is a show of perfection..
Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, offering the most direct and exact control feel back to the pilot; greatest spec 2mm thick carbon fiber plate with trademarked plastic integration strategies not just strengthen the structure, however likewise develop a neat and clean appearance; Unique battery lock assembly for more powerful install and simpler battery replacement.
A power upgrade system designed specifically to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo battery charger was added to the helicopter, with significant boost of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration. In addition, the brand name brand-new spindle shaft design includes enlarged size from 6mm to 8mm, with extra-large M5x10mm spindle screws to increase the rigidity of the overall rotor head.
The astounding flying performance and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop among all competitors!

Standard devices:
Gpro Flybarless System X 1 set
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Spec:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Gear: 14T
Main Drive Gear: 118T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Devices:
T-REX 600E DFC Kits Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down
Gpro Flybarless System x 1set Radio transmitter and electronic devices required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Includes :
ALIGN brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The freshly brand-new software application structure enhances system compensation, bring GPro up with exact and agile reaction, and also keep current flying performance than ever.The crucial is that uses with latest iOS and Android APP can be quickly and directly changed through cellphone while at the field. New human oriented interface permits hassle-free and quick setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with exact and agile response.
Freshly brand-new software application process structure enhances system compensation and keep current flying performance.
Utilizes with latest iOS and Android APP that GPro can be quickly and directly changed through cellphone while flying outdoors.
New human oriented interface permits hassle-free and quick setup and installation.
Superior flying characteristic stay the same flying control amongst T-REX 250~800 helicopters.
Full assistance receivers and satellites presently on the marketplace, including S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Running voltage range:DC 3.5V~8.4V
Running current consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup