Align T-REX 600E PRO DFC Combo (With out GPro)

Presenting:
The brand name brand-new T-Rex 600E PRO DFC is the result of innovative engineering motivated by the art of modern industrial design. Matched with Gpro flybarless system, the brand-new generation T-Rex 600E PRO DFC is a show of perfection..
Equipped with the low CG DFC rotor head, effectively minimize wind resistance during flight, providing the most direct and exact control feel back to the pilot; highest spec 2mm thick carbon fiber plate with trademarked plastic integration techniques not only strengthen the structure, however also produce a cool and tidy look; Distinct battery latch assembly for more powerful install and much easier battery replacement.
A power upgrade system created specifically to bump up the power output of T-Rex 600E Pro by 30% by updating the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo battery charger was added to the helicopter, with dramatic boost of motor torque output, and near bulletproof governing speed of the rotor, while keeping power consistency throughout the whole flight duration. In addition, the brand name brand-new spindle shaft design includes bigger size from 6mm to 8mm, with extra-large M5x10mm spindle screws to increase the rigidity of the general rotor head.
The amazing flying efficiency and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop among all competitors!

Standard devices:
Castle EDGE HV 80 Brushless ESC x 1
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
6A External BEC w/ 5.1V Two-way Step-down

Specification:
Length: 1160mm
Height: 319mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Equipment: 14T
Main Drive Equipment: 118T
Autorotation Tail Drive Equipment: 131T
Tail Drive Equipment: 34T
Drive Equipment Ratio: 1:8.42:3.85
Weight(With Motor): 2840g Devices:
T-REX 600E DFC Sets Set x 1set
600 Carbon Fiber Blades x 1set
95 Carbon Fiber Tail Blade x 1set
750MX Brushless Motor(530KV) x 1
DS615 Digital servo x 3
DS655 Digital servo x 1
Castle EDGE HV 80 Brushless ESC x 1
6A External BEC w/ 5.1V Two-way Step-down Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 4600mAh X2 (3300mAh idea)
Digital Pitch Gauge/Dial Pitch Gauge Gpro Programmable Flybarless System Includes :
LINE UP brand-new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The newly brand-new software application structure improves system payment, bring GPro up with exact and nimble action, as well as keep updated flying efficiency than ever.The most important is that uses with most current iOS and Android APP can be quickly and directly adjusted through cellphone while at the field. New human oriented user interface enables hassle-free and fast setup and installation.

Brand brand-new CPU, processing 20 times faster than previous generation, bring GPro up with exact and nimble response.
Freshly brand-new software application procedure structure improves system payment and keep updated flying performance.
Utilizes with most current iOS and Android APP that GPro can be quickly and directly adjusted through cellphone while flying outdoors.
New human oriented user interface enables hassle-free and fast setup and installation.
Superior flying characteristic stay the same flying control amongst T-REX 250~800 helicopters.
Full assistance receivers and satellites currently on the marketplace, including S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

Gpro Programmable Flybarless System:
Operating voltage range:DC 3.5V~8.4V
Operating present usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Please Click here for Download GPro
Please Click here for GPro Manual
Please Click here for GPro Hardware Connection
Please Click here for GPro Spektrum blinding
Please Click here for GPro Parameter Setup
Please Click here for GPro Android APP Setup
Please Click here for GPro iOS APP Setup