Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with numerous modification holes, enabling the maker to be tweaked for either high control resolution or high stability based on the needs of the individual pilot. In addition, the T-REX 600N V2 features a variety of efficiency upgrade parts for a renewed appearance and enhanced efficiency. Plus, this combination plan includes a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of favorable and unfavorable deltas, numerous Bell and Hiller blending ratios readily available, along with different flybar ratio settings.
The head assembly enables pilots to gain from greater control resolution in addition to stability level, satisfying the requirement of both extremely stable static categories in addition to precision aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is added to the top of the main gear hub to ensure stable rotation, and remove one method bearing jamming.
Re-designed unibody stainless-steel tail drive gear center install, for more precise tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly utilizing 5mm carbon rod and metal ports, leading to enhanced rudder control precision.
Re-designed tail transmission, with aesthetically pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, lowering engine load and improving cooling efficiency.
Large size clutch system with unique installation method for excellent balance, very little vibration, and efficient power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder action and excellent tail locking ability.
Unique H sample shaped electronic mounting platform for easy electronic mounting and protection.
Large capability 440cc fuel tank for approximately 10 minutes of extreme 3D flights.
Starting and clutch supporting point makes use of 10mm one method bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight extremely nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Designed with principles from big helicopter competitors, for the very best static and vibrant flight performance.
GP900 Head Lock Gyro Includes:
Uses MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are little, extremely reliable, and extremely stable.
16 bit high processing speed CPU is utilized for ultra high resolution, leading to greater rudder precision than previously possible, even on contemporary high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both large and narrow band receivers.
Integrated RCE-G600 speed governor function, hence GP900 can offer speed governor function without additional electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Higher vibration resistance than other systems. Superior efficiency is attainable even with harder mounting foam tapes.
Support parameter setting through PC user interface, in addition to firmware updates.
Anti-torque settlement. Ideal tail locking attainable no matter if gyro is mounted upright or inverted.
600N V2 Requirements:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor size: 1350mm

Tail rotor size: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Requirements:

Operating Voltage: DC 3.5~8.4V

Existing Usage: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump