Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Restricted Edition" Helicopter Combo Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with numerous change holes, permitting the maker to be fine tuned for either high control resolution or high stability based upon the needs of the private pilot. Furthermore, the T-REX 600N V2 includes a range of efficiency upgrade components for a restored look and enhanced efficiency. Plus, this combination package consists of a 600D PRO Carbon fiber blade set, three DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combination and a 2 In 1 voltage regulator combination!
600N V2 Features:
600 sized programmable head assembly with 3 sets of favorable and negative deltas, many Bell and Hiller mixing ratios readily available, in addition to numerous flybar ratio settings.
The head assembly enables pilots to gain from higher control resolution as well as stability level, pleasing the requirement of both extremely stable fixed classifications as well as accuracy aerobatic categories.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is added to the top of the primary equipment center to guarantee stable rotation, and remove one method bearing jamming.
Re-designed unibody stainless steel tail drive equipment center mount, for more precise tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal adapters, resulting in enhanced rudder control precision.
Re-designed tail gear box, with aesthetically pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, decreasing engine load and improving cooling efficiency.
Large diameter clutch system with distinct setup method for excellent balance, minimal vibration, and reliable power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking ability.
Unique H random sample formed electronic mounting platform for easy electronic mounting and protection.
Large capacity 440cc fuel tank for as much as 10 minutes of extreme 3D flights.
Starting and clutch supporting point uses 10mm one method bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight extremely nimble flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Designed with concepts from large helicopter competitors, for the very best fixed and dynamic flight performance.
GP900 Head Lock Gyro Features:
Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensing units which are little, extremely trusted, and extremely stable.
16 bit high processing speed CPU is utilized for ultra high resolution, resulting in higher rudder accuracy than previously possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, traditional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both wide and narrow band receivers.
Integrated RCE-G600 speed governor function, hence GP900 can provide speed governor function without extra electronics.
Suitable for all 200 to 700 size radiance engine and electrical helicopters
Higher vibration resistance than any other systems. Superior efficiency is possible even with more difficult mounting foam tapes.
Support specification setting through PC user interface, as well as firmware updates.
Anti-torque settlement. Ideal tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Specifications:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion equipment: 20T

Autorotation tail drive equipment: 180T

Drive equipment ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approximate. 3200g
GP900 Specifications:

Running Voltage: DC 3.5~8.4V

Existing Usage: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump